Page 69 - HOLE MAKING CATALOG p001-148
P. 69
MNC-7/8D PL OAL INDEXABLE DRILLS
Large Diameter Indexable Drills DC PDD LPR
for the Wind Turbine Industry LU
DCONMS DF
Designation DC PDD LU PL LPR OAL DCONMS DF Insert(1) Insert 1(2)
MNC 332-265 A32-175-09-8D 33.20 17.50 270.60 5.570 304.40 358.80 32.00 42.00 SOGT 09T306-W HCP 175-IQ
42.00 SOGT 100408-W HCP 190-IQ
MNC 362-289 A32-190-10-8D 36.20 19.00 294.60 5.570 326.90 381.30 32.00 50.00 SOGT 100408-W HCP 219-IQ
MNC 392-289 A40-219-10-7D 39.20 21.90 294.90 5.940 352.20 414.30 40.00
• Hole tolerance: D+0.10/-0.05 in average conditions. However, it can be higher or lower according to machine and tooling conditions • Intermediate sizes are available on
request • For user guide and cutting conditions, see pages 68-81
(1) Outer insert
(2) Central insert
For inserts, see pages: HCP-IQ (47) • SOGT-W (67)
Spare Parts SR 34-506 BLD T09/M7-SW4 SW4-SD K MNC MULTI SR 34-508 SR 34-508/S-HG T-7/51
SR 14-571 BLD T10/S7 SW6-SD K MNC MULTI SR 34-508 T-7/51
Designation SR 14-571 BLD T10/S7 SW6-SD K MNC MULTI SR 34-508 T-7/51
MNC 332-265 A32-175-09-8D
MNC 362-289 A32-190-10-8D
MNC 392-289 A40-219-10-7D
SOGX-W RE
Precision Ground Inserts with
DT General Use Chipformer IC
and a Wiper for MNC S
Large Diameter Drills
Dimensions
Designation IC RE Tough 1 HardIC808
S 0.40 IC8080
2.40 0.40 •
SOGX 050204-W 5.40 3.20 0.50 •
SOGX 060304-W 6.20 3.60 ••
7.70
SOGX 070305-W
• For user guide and cutting conditions, see pages 68-81
For tools, see pages: MNC-5D (66)
SOGT-W RE
Precision Ground Inserts with
DT General Use Chipformer IC
and a Wiper for MNC Drills S
Designation IC Dimensions RE Tough 1 HardIC808
0.60 IC8080
S 0.80 ••
SOGT 09T306-W 9.00 3.81 0.80 ••
SOGT 100408-W 9.80 4.30 •
12.70 4.76
SOGT 120408-W 67
• For user guide and cutting conditions, see pages 68-81
For tools, see pages: MNC-5D (66) • MNC-7/8D (67)