Page 83 - HOLE MAKING CATALOG p383-544
P. 83
PICCO R/L 520 LF DCONMS IC908
Inserts for Internal Chamfering
RE CDX ITS BORE
WF Right-hand shown
KAPR
Dimensions
Designation DCONMS WF KAPR(1) LF RE CDX DMIN •
5.00 1.50 1.00 •
PICCO R/L 520.0045-15 5.00 1.50 45.0 30.00 0.20 3.50 1.00
PICCO R/L 520.0060-15
60.0 30.00 0.20 4.00
• Left hand inserts on request
(1) Tool cutting edge angle
PLT DCONMS OAL G1
Cover Plate Protects the 16.00
Serrated Faces When a 20.00 DCONMS G1
Single Toolholder is Used 25.00 H SR M3x12 DIN912
32.00 SR M4x14 DIN912
Designation 40.00 H OAL SR M4x16 DIN7991
PLT 16 50.00 7.0 14.00 SR M5x20 DIN7991
PLT 20 63.00 8.5 17.00 SR M6x25 DIN7991
PLT 25 80.00 10.2 21.00 SR M8x25 DIN7991
PLT 32 13.9 28.00 SR M10x30 DIN7991
PLT 40 17.4 35.00 SR M12x35 DIN7991
PLT 50 21.4 47.50
PLT 63 26.4 62.00
PLT 80 33.9 82.50
465
