Page 82 - HOLE MAKING CATALOG p383-544

ITS BORE PICCO R/L 090 LF
Inserts for Internal
Turning and Profiling DCONMS

90° WF OHN DMIN
a CDX Right-hand shown

20° RE

Dimensions

Designation DCONMS WF a LF OHN(1) RE CDX(2) DMIN IC228

PICCO R/L 090.3-10 4.00 0.60 2.60 24.00 9.0 0.10 0.20 2.80 •
PICCO R/L 090.3-16 4.00 0.60 0.20 2.80 •
PICCO R/L 090.4-10 4.00 1.50 2.60 30.00 15.0 0.10 0.30 4.00 •
PICCO R/L 090.4-16 4.00 1.50 0.30 4.00 •
PICCO R/L 090.5-10 5.00 1.90 3.50 24.00 9.0 0.10 0.50 5.00 •
PICCO R/L 090.5-15 5.00 1.90 0.50 5.00 •
PICCO R/L 090.5-20 5.00 1.90 3.50 30.00 15.0 0.10 0.50 5.00 •

4.40 25.00 9.0 0.15

4.40 30.00 14.0 0.15

4.40 35.00 19.0 0.15

• Specify right- or left-hand bars

(1) Minimum overhang

(2) Cutting depth maximum

LF

PICCO R 050 (CBN) 5° DCONMS
CBN Tipped Inserts for
Internal Turning, Profiling and WF 8° OHN
Chamfering of Hard Steel a RE CDX

20° Right-hand shown • HARD MATERIALS

Dimensions

Designation DCONMS WF a LF OHN(1) CDX(2) DMIN RE IC902 IB55

PICCO R 050.3-10B 4.00 0.60 2.60 25.50 10.0 0.20 2.80 0.10 •
0.30 4.00 0.10 •
PICCO R 050.4-10B 4.00 1.50 3.50 25.50 10.0 0.50 5.00 0.15 •
0.50 6.00 0.15 •
PICCO R 050.5-15B 5.00 1.90 4.40 31.50 15.0 0.60 6.80 0.15 •

PICCO R 050.6-15B 6.00 2.30 5.30 31.50 15.0

PICCO R 050.7-20B 7.00 2.80 6.30 36.50 20.0

• It is not recommended to use coolant when machining with CBN tipped tools • Available on request only

(1) Minimum overhang

(2) Cutting depth maximum

LF

PICCO R/LHD 050 DCONMS
Inserts for Internal Turning
and Chamfering of Hard 8° OHN DMIN
Steel - Up to 65 HRC
a

WF 20° RE CDX

Dimensions

Designation DCONMS WF a LF OHN(1) RE CDX(2) DMIN •
•
PICCO R/LHD 050.2-5 4.00 - 1.70 19.00 4.0 0.05 0.10 2.00 •
PICCO R/LHD 050.3-10 4.00 0.60 0.20 2.80 •
PICCO R/LHD 050.3-16 4.00 0.60 2.60 24.00 9.0 0.10 0.20 2.80 •
PICCO R/LHD 050.4-10 4.00 1.50 0.30 4.00 •
PICCO R/LHD 050.4-20 4.00 1.50 2.60 30.00 15.0 0.10 0.30 4.00 •
PICCO R/LHD 050.5-10 5.00 1.90 0.50 5.00 •
PICCO R/LHD 050.5-15 5.00 1.90 3.50 24.00 9.0 0.10 0.50 5.00 •
PICCO R/LHD 050.6-15 6.00 2.30 0.50 6.00 •
PICCO R/LHD 050.7-20 7.00 2.80 3.50 34.00 19.0 0.10 0.60 6.80 •
PICCO R/LHD 050.7-25 7.00 2.80 0.60 6.80
PICCO R/LHD 050.7-35 7.00 2.80 4.40 25.00 9.0 0.15 0.60 6.80

• Specify right- or left-hand bars 4.40 30.00 14.0 0.15

(1) Minimum overhang 5.30 30.00 14.0 0.15

(2) Cutting depth maximum 6.30 35.00 19.0 0.15

6.30 40.00 24.0 0.15

6.30 50.00 34.0 0.15

464 ISCAR