Page 78 - HOLE MAKING CATALOG p383-544
P. 78
ITS BORETPGX (CBN) 60° 11° 91º
Triangular Inserts with CBN RE LE D1
IB90Single Top Corner Brazed Tip, Recommended
ID511° Clearance for MachiningIC Machining Data
Cast Iron and Hardened Steel
IB50
IC908LS
Dimensions Tough 1 Hard
ap f
Designation L IC S RE LE D1 (mm) (mm/rev)
• •
TPGX 090202T 9.52 5.56 2.38 0.20 2.5 2.50 • • 0.05-0.50 0.03-0.20
TPGX 090204T 9.52 5.56 2.38 0.40 2.6
2.50 • • 0.05-0.50 0.03-0.20
TPGX 110302T 11.00 6.35 3.18 0.20 3.3
TPGX 110304T 11.00 6.35 3.18 0.40 3.0 3.50 • • 0.05-0.50 0.03-0.20
3.50 0.05-0.50 0.03-0.20
For tools, see pages: IHAXF (432) • IHAXF-AVI (434) • IHAXF-E (434) • IHFF (436) • IHFF-C (413)
60° 7° 91º
RE LE
TPGX (PCD) 11° Recommended Machining Data
Triangular Inserts with PCD IC D1
Single Top Corner Brazed Tip,
11° Clearance and Positive Rake LS
Angle for Finishing Aluminum
Dimensions
ap f
Designation L IC S RE LE D1 (mm) (mm/rev)
5.56 2.38 0.20 3.0 2.50 • 0.10-3.00 0.05-0.30
TPGX 090202 9.52 5.56 2.38 0.40 3.0 2.50 • 0.10-3.00 0.05-0.30
TPGX 090204 9.52 6.35 3.18 0.20 3.4 3.50 • 0.10-3.00 0.05-0.30
11.00 6.35 3.18 0.40 3.8 3.50 • 0.10-3.00 0.05-0.30
TPGX 110302 11.00
TPGX 110304
For tools, see page: AIHAXF (432)
PICCO R/LX050 A 45° LF DCONMS DMIN
Reinforced Boring Inserts 7° DMIN≥3
with Internal Coolant Holes 0.2 6° DMIN<3
a A
WF 6° CDX
RE OHN
Dimensions
Designation DCONMS WF a RE LF OHN(1) CDX(2) DMIN
0.10 2.00 •
PICCO R/LX050.2-5R15 4.00 - 1.80 0.15 19.00 5.0 0.10 2.00 •
PICCO R/LX050.2-10R05 4.00 - 1.80 0.05 24.00 10.0 0.10 2.00 •
PICCO R/LX050.2-10R15 4.00 - 1.80 0.15 24.00 10.0 0.15 3.00 •
PICCO R/LX050.3-16R10 4.00 0.70 2.70 0.10 30.00 16.0 0.15 3.00 •
PICCO R/LX050.3-16R20 4.00 0.70 2.70 0.20 30.00 16.0 0.20 4.00 •
PICCO R/LX050.4-10R10 4.00 1.60 3.60 0.10 24.00 10.0 0.20 4.00 •
PICCO R/LX050.4-10R20 4.00 1.60 3.60 0.20 24.00 10.0 0.20 4.00 •
PICCO R/LX050.4-16R10 4.00 1.60 3.60 0.10 30.00 16.0 0.20 4.00 •
PICCO R/LX050.4-16R20 4.00 1.60 3.60 0.20 30.00 16.0 0.30 5.00 •
PICCO R/LX050.5-15R10 5.00 2.10 4.60 0.10 30.00 15.0 0.30 5.00 •
PICCO R/LX050.5-15R20 5.00 2.10 4.60 0.20 30.00 15.0 0.30 5.00 •
PICCO R/LX050.5-25R10 5.00 2.10 4.60 0.10 40.00 25.0 0.30 5.00 •
PICCO R/LX050.5-25R20 5.00 2.10 4.60 0.20 40.00 25.0 0.40 6.00 •
PICCO R/LX050.6-15R10 6.00 2.50 5.50 0.10 30.00 15.0 0.40 6.00 •
PICCO R/LX050.6-15R20 6.00 2.50 5.50 0.20 30.00 15.0 0.40 6.00 •
PICCO R/LX050.6-22R20 6.00 2.50 5.50 0.20 37.00 22.0 0.40 6.00 •
PICCO R/LX050.6-35R20 6.00 2.50 5.50 0.20 50.00 35.0
• Left-hand inserts on request
(1) Minimum overhang
(2) Cutting depth maximum
460 ISCAR
