Page 78 - MILLING CATALOG p001-094

ENDMILLS • SOLID CARBIDE • MULTI-MASTER MM EC-8/10 DC THSZMS Rd°
Interchangeable 8, 10 Flute DCONMS
Solid Carbide Endmill Heads RE APMX Recommended
with 30° and 45° Helix and LF FHA Machining Data
Various Corner Radii
Dimensions

Designation DC NOF(2) APMX RE THSZMS DCONMS LF FHA RMPX°(3) IC908 fz

MM EC160A12R0.5-8T10 16.00 8 12.00 0.50 T10 15.30 20.50 30.0 5.0 • (mm/t)
MM EC160A12R0.5-8T10H (1) 16.00 8 12.00 0.50 5.0 •
16.00 8 12.00 1.00 T10 15.30 20.50 30.0 5.0 • 0.05-0.13
MM EC160A12R1.0-8T10 • 0.05-0.13
T10 15.30 20.50 30.0 • 0.05-0.13
• 0.05-0.13
MM EC160A12R1.6-8T10 16.00 8 12.00 1.60 T10 15.30 20.50 30.0 5.0 • 0.05-0.13
MM EC160A12R2.0-8T10 16.00 8 12.00 2.00 5.0 • 0.05-0.13
MM EC160B12R0.5-8T10 16.00 8 12.00 0.50 T10 15.30 20.50 30.0 5.0 • 0.05-0.13
• 0.05-0.13
T10 15.30 20.50 45.0 • 0.05-0.13
• 0.05-0.13
MM EC160B12R1.0-8T10 16.00 8 12.00 1.00 T10 15.30 20.50 45.0 5.0 0.05-0.13
0.05-0.13
MM EC160B12R1.6-8T10 16.00 8 12.00 1.60 T10 15.30 20.50 45.0 5.0

MM EC160B12R2.0-8T10 16.00 8 12.00 2.00 T10 15.30 20.50 45.0 5.0

MM EC200A15R1.0-10T12 20.00 10 15.00 1.00 T12 18.45 25.50 30.0 3.0

MM EC200A15R2.0-10T12 20.00 10 15.00 2.00 T12 18.45 25.50 30.0 3.0

MM EC250A22R0.8-10T15 25.00 10 22.00 0.80 T15 23.90 37.00 30.0 3.0

• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92

• Do not apply lubricant to the threaded connection. • For user guide see pages 44, 177-184

(1) With a central coolant hole

(2) Number of flutes

(3) Maximum ramping angle

MM EC-CF-Z7/9-1.5xD RE APMX THSZMS Rd°
Interchangeable 7, 9 Flute Solid DCe8 DCONMS
Carbide Endmill Heads with 36° Recommended
Helix and 1.5xD Flute Lengths FHA Machining Data

LF

Dimensions

Designation DC APMX RE NOF(1) THSZMS DCONMS LF FHA RMPX°(2) IC908 fz

MM EC080H12R05CF-7T05 8.00 12.00 0.50 7 T05 7.70 18.00 36.0 3.0 • (mm/t)
MM EC100H15R05CF-7T06 10.00 15.00 0.50 7 3.0 • 0.03-0.10
MM EC120H18R05CF-7T08 12.00 18.00 0.50 7 T06 9.60 22.00 36.0 3.0 • 0.04-0.10
MM EC160H24R08CF-9T10 16.00 24.00 0.80 9 1.0 • 0.04-0.10
MM EC200H30R10CF-9T12 20.00 30.00 1.00 9 T08 11.70 27.00 36.0 1.0 • 0.05-0.10
MM EC250H37R10CF-9T15 25.00 37.00 1.00 9 1.0 • 0.05-0.10
T10 15.30 33.50 36.0 0.05-0.10

T12 18.45 41.00 36.0

T15 23.90 52.50 36.0

• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92

• Do not apply lubricant to the threaded connection • For user guide see pages 44, 177-184

(1) Number of flutes

(2) Maximum ramping angle

76 ISCAR