Page 80 - MILLING CATALOG p001-094
P. 80
ENDMILLS • SOLID CARBIDE • MULTI-MASTER CHWx45° THSZMS
DCONMS
MM EC-H-4-CF DC a1° a2°
Interchangeable Solid Carbide APMX FHA (46-48°)
Endmill Heads for CHATTERFREE LF a4° a3°
Milling of Alloyed Steel a1≠a2≠a3≠a4
Dimensions Recommended
Machining Data
Designation DC NOF(1) APMX THSZMS DCONMS LF CHW KCH IC908 fz
MM EC080H05C3-4T05CF 8.00 4 5.00 T05 7.70 10.00 0.30 45.0 • (mm/t)
MM EC100H07C4-4T06CF 10.00 4 • 0.03-0.09
12.00 4 7.00 T06 9.60 13.00 0.40 45.0 • 0.03-0.10
MM EC120H09C5-4T08CF • 0.04-0.11
9.00 T08 11.70 16.50 0.50 45.0 • 0.05-0.13
0.05-0.17
MM EC160H12C6-4T10CF 16.00 4 12.00 T10 15.30 20.50 0.60 45.0
MM EC200H15C6-4T12CF 20.00 4
15.00 T12 18.45 25.50 0.60 45.0
• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide see pages 44, 177-184
(1) Number of flutes
RE APMX THSZMS Rd°
DCe8 DCONMS
MM EC-CF-Z4-1.5xD Recommended
Interchangeable Solid Carbide LF FHA Machining Data
Endmill Heads with 1.5xD Flute
Lengths for CHATTERFREE Dimensions
Roughing and Finishing
Designation DC NOF(1) APMX RE THSZMS DCONMS LF FHA IC908 fz
MM EC080H12R05CF-4T05 8.00 4 12.00 0.50 T05 7.70 18.00 46.5 • (mm/t)
• 0.03-0.09
MM EC100H15R05CF-4T06 10.00 4 15.00 0.50 T06 9.60 22.00 46.5 • 0.03-0.10
• 0.04-0.11
MM EC120H18R05CF-4T08 12.00 4 18.00 0.50 T08 11.70 27.00 46.5 • 0.05-0.13
• 0.05-0.17
MM EC160H24R05CF-4T10 16.00 4 24.00 0.50 T10 15.30 33.50 46.5 0.06-0.17
MM EC200H30R05CF-4T12 20.00 4 30.00 0.50 T12 18.45 41.00 46.5
MM EC250H37R05CF-4T15 25.00 4 37.00 0.50 T15 23.90 52.50 46.5
• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection • For user guide see pages 44, 177-184
(1) Number of flutes
MM EC-H-5-CF THSZMS a1° a2° Rd°
Interchangeable Solid Carbide DCONMS a3°
Endmill Heads for CHATTERFREE DC Recommended
Milling of High Temperature CHWx45° FHA (35 - 41°) a5° a4° Machining Data
Alloys like Titanium and Inconel a1≠a2≠a3≠a4≠a5
APMX
LF
Dimensions
Designation DC NOF(1) APMX THSZMS DCONMS LF RMPX°(2) CHW KCH IC308 fz
MM EC080H05C3-5T05CF 8.00 5 5.00 T05 7.70 10.00 5.0 0.30 45.0 • (mm/t)
MM EC100H07C4-5T06CF 10.00 5 7.00 T06 9.60 13.00 5.0 0.40 45.0 • 0.03-0.09
• 0.03-0.10
MM EC120H09C5-5T08CF 12.00 5 9.00 T08 11.70 16.50 4.0 0.50 45.0 • 0.04-0.11
MM EC160H12C6-5T10CF 16.00 5 0.60 45.0 • 0.05-0.13
MM EC200H15C6-5T12CF 20.00 5 12.00 T10 15.30 20.50 4.0 0.60 45.0 • 0.05-0.17
MM EC250H22C6-5T15CF 25.00 5 0.60 45.0 0.06-0.17
15.00 T12 18.45 25.50 3.0
22.00 T15 23.90 37.00 3.0
• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide see pages 44, 177-184
(1) Number of flutes
(2) Maximum ramping angle
78 ISCAR