Page 82 - MILLING CATALOG p001-094

ENDMILLS • SOLID CARBIDE • MULTI-MASTER MM ERS CHWx45° THSZMS Rd°
Interchangeable Solid Carbide DCONMS
Rough Milling Heads for High DC Recommended
Metal Removal Rates FHA Machining Data

APMX
LF

Dimensions

Designation DC NOF(3) APMX THSZMS DCONMS LF FHA RMPX°(4) CHW KCH IC908 fz

MM ERS080B05-4T05 8.00 4 5.00 T05 7.70 10.00 45.0 5.0 0.25 45.0 • (mm/t)
MM ERS080B09-4T05 8.00 4 9.00 T05 7.70 15.00 45.0 5.0 0.25 45.0 •
10.00 4 7.00 T06 9.60 13.00 45.0 5.0 0.30 45.0 • 0.03-0.08
MM ERS100B07-4T06 • 0.03-0.08
• 0.03-0.09
MM ERS120B09-4T08 12.00 4 9.00 T08 11.70 16.50 45.0 5.0 0.35 45.0 • 0.04-0.10
MM ERS120B09-4T08H (1) 12.00 4 • 0.04-0.10
MM ERS120B09-4T08I (2) 12.00 4 9.00 T08 11.70 16.50 45.0 5.0 0.35 45.0 • 0.04-0.11
• 0.04-0.10
9.00 T08 11.70 16.50 45.0 5.0 0.35 45.0 • 0.04-0.10
• 0.04-0.10
MM ERS120B14-4T08 12.00 4 14.00 T08 11.70 23.00 45.0 5.0 0.35 45.0 0.05-0.11
0.05-0.11
MM ERS160B12-5T10 16.00 5 12.00 T10 15.30 20.50 45.0 5.0 0.40 45.0

MM ERS160B12-5T10H (1) 16.00 5 12.00 T10 15.30 20.50 45.0 5.0 0.40 45.0

MM ERS200B15-6T12 20.00 6 15.00 T12 18.45 25.50 45.0 3.0 0.40 45.0

MM ERS250B22-6T15 25.00 6 22.00 T15 23.90 37.00 45.0 3.0 0.50 45.0

• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92

• Do not apply lubricant to the threaded connection. • For user guide see pages 44, 177-184

(1) With a central coolant hole

(2) With coolant holes directed to each flute

(3) Number of flutes

(4) Maximum ramping angle

CHW APMX THSZMS Rd°
DCe9 DCONMS
MM ERS-1.5xD FHA Recommended
Interchangeable Solid Carbide LF Machining Data
Rough Milling Heads with
1.5xD Flute Lengths for High Dimensions
Metal Removal Rates

Designation DC NOF(1) APMX CHW KCH THSZMS DCONMS LF FHA RMPX°(2) IC908 fz

MM ERS080B12-4T05 8.00 4 12.00 0.25 45.0 T05 7.70 18.00 46.0 5.0 • (mm/t)
MM ERS100B15-4T06 10.00 4 15.00 0.30 45.0 • 0.03-0.08
MM ERS120B18-4T08 12.00 4 18.00 0.35 45.0 T06 9.60 22.00 46.0 5.0 • 0.03-0.09
MM ERS160B24-5T10 16.00 5 24.00 0.40 45.0 • 0.04-0.10
MM ERS200B30-6T12 20.00 6 30.00 0.40 45.0 T08 11.70 27.00 46.0 5.0 • 0.04-0.10
MM ERS250B37-6T15 25.00 6 37.00 0.50 45.0 • 0.05-0.11
T10 15.30 33.50 40.0 5.0 0.05-0.11

T12 18.45 41.00 47.0 3.0

T15 23.90 52.50 47.0 3.0

• For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92

• Do not apply lubricant to the threaded connection • For user guide see pages 44, 177-184

(1) Number of flutes

(2) Maximum ramping angle

80 ISCAR