Page 159 - MILLING CATALOG p319-550
P. 159
T290 LNMT 1506 W1 IC830
Tangential Insert with IC808
2 Cutting Edges APMX L IC810
S BS
RE MILLING INSERTS
Dimensions Tough 1 Hard Recommended
Machining Data
ap fz
Designation W1 L APMX S BS RE (mm) (mm/t)
11.50 0.80 • • •
T290 LNMT 150608TR 5.60 15.90 15.00 2.00 5.00-15.00 0.10-0.22
• LNMT-utility inserts • For cutting speed recommendations, see pages 542-547
For tools, see pages: T290 FLN-15 (207)
Fig. 1 Fig. 2
T890 LN.. 1306 APMX INSL
Tangentially Clamped Inserts
with 4 or 8 Cutting Edges
Dimensions W1 RE CHWx45°
BS RE
Tough 1 Hard
Recommended Machining Data
Designation APMX INSL W1 BS RE CHW CEDC(2) Fig. IC845 ap fz
IC830
IC5400 (mm) (mm/t)
IC5500 1.00-9.50 0.10-0.20
IC808 1.00-9.50 0.10-0.20
IC810 0.50-1.00 0.10-0.20
IC5100
T890 LNHT 1306PNTR 9.50 13.78 6.00 - 0.80 - 8 1 •••••••
• •••
T890 LNMT 1306PNTR 9.50 13.75 6.00 - 0.80 - 8 1 •
T890 LNAT 1306PN-W (1) 9.50 13.92 5.90 4.30 0.60 0.60 4 2
(1) A wiper insert for finishing only
(2) Cutting edge count
For tools, see pages: T890HT ELN-R13 (29) • T890HT FLN-R13 (202)
Machining Recommendations for T890HT-13 Cutters
Workpiece Material Cutting Feed per
Carbide Depth of speed tooth
ISO class ISCAR mat. Hardness Typical Representative grade cut [mm] [m/min]
DIN/ISO 513 mm/tooth]
Description group* HB AISI/SAE/ASTM DIN W.-Nr. 0.12-0.20 Coolant
0.12-0.18 Dry/Wet
IC830 140-170 0.12-0.18
0.12-0.16 Dry
Non-alloyed steel 1-5 130-180 1020 1.0402 IC5400 1.0-9.5 140-180 0.10-0.14 Dry
0.10-0.13 Dry/Wet
IC808 150-180 0.12-0.18 Dry
0.12-0.15 Dry
IC830 120-150 0.10-0.13 Dry/Wet
0.10-0.12 Dry/Wet
6-8 260-300 4340 1.6565 IC808 1.0-9.5 130-160 0.12-0.15 Dry
1.5710 IC5400 1.0-4.5 150-170 0.10-0.15 Dry
P Low alloy steel IC845 1.0-9.5 120-150 0.10-0.13 Dry/Wet
IC830 100-130 0.10-0.15 Dry/Wet
9 HRC 35-42** 3135 IC808 120-150 0.10-0.20 Dry
IC5400 130-160 0.10-0.20 Dry
IC845 1.0-4.5 120-150 Dry
Ferritic/ 12-13 200 420 1.4021 IC830 1.0-9.5 100-120
martensitic IC808 100-130
stainless steel
IC5500 1.0-4.5 110-150
K Grey cast iron 15-16 250 Class 40 0.6025 (GG25) IC810 1.0-9.5 200-250
Nodular cast iron 17-18 200 Class 65-45-12 0.7050 (GGG50) IC810 180-200
* ISCAR material group in accordance with VDI 3323 standard
** Quenched and tempered
For machining in unstable conditions, the recommended cutting data should be reduced by 20-30%
IC830 is a general purpose grade and it may be considered as the first-choice grade
IC845 is recommended for milling at relatively small depths of cut and for interrupted cutting applications
IC5500 is intended mainly for milling ferritic and martensitic stainless steel at increased speed
475