Page 158 - MILLING CATALOG p319-550

MILLING INSERTS H690 TNKX 1606 IC
Triangular Inserts with 6 Helical 2
Cutting Edges for 90° Shoulders APMX L
3

S BS RE

Tough 1 Hard
Dimensions IC330 1 Recommended
IC845 Machining Data
IC830
IC808 ap fz
IC810
IC5100
Designation L APMX IC S RE BS (mm) (mm/t)
10.00 0.80 0.70 •
H690 TNKX 1606PNTR-CS (1) 17.50 13.50 12.00 10.00 1.00 1.20-13.50 0.15-0.30
H690 TNKX 160610PNTR 17.50 13.50 12.00 0.70 • • • • • • 1.40-13.50 0.15-0.30

• For cutting speed recommendations, see pages 542-547 ..

(1) The maximum feed per tooth for chip splitting effect is up to 0.22 mm/t

For tools, see pages: H690 F90AX-16 (214)

T290 LNMT/LNHT 0502 W1
Tangential Inserts with
2 Cutting Edges L
BS
APMX

S RE

Dimensions Tough 1 Hard Recommended
Machining Data

Designation W1 L APMX S BS RE IC330 ap fz
IC830
IC5400 (mm) (mm/t)
IC808 2.00-5.00 0.03-0.07
IC810 2.00-5.00 0.03-0.07
2.00-5.00 0.03-0.07
T290 LNHT 050202TR 2.70 5.75 5.00 5.85 1.20 0.20 •• 2.00-5.00 0.03-0.07
• 2.00-5.00 0.04-0.08
T290 LNHT 050204TR 2.70 5.75 5.00 5.85 1.00 0.40 •

T290 LNHT 050208TR 2.70 5.75 5.00 5.85 1.00 0.80 •

T290 LNHT 050210TR 2.70 5.75 5.00 5.85 1.00 1.00
0.40 • • • • •
T290 LNMT 050204TR 2.70 5.75 5.00 5.85 1.00

• LNMT-utility inserts. LNHT-precision inserts • For cutting speed recommendations, see pages 542-547

For tools, see pages: E30 / T230 (36) • E45 / T245 (38) • E60 / T260 (39) • T290 ELN-05 (15) • T290 ELN-MM-05 (15)

T290 LNMT/LNHT 1004 W1 L
Tangential Insert with BS RE
2 Cutting Edges APMX
S Tough 1 Hard

Dimensions Recommended
Machining Data

IC330 ap fz
IC830
Designation W1 L APMX S BS RE IC5400 (mm) (mm/t)
IC808
IC810
IC5100

T290 LNHT 100405TR 4.10 10.40 10.00 8.90 1.30 0.50 • 3.00-9.00 0.08-0.20
0.50 • • • • • • 3.00-9.00 0.08-0.20
T290 LNMT 100405TR 4.10 10.40 10.00 8.90 1.30

• LNMT-utility inserts, LNHT-precision inserts • For cutting speed recommendations, see pages 542-547

For tools, see pages: T290 ELN-10 (21) • T290 FLN-10 (198)

474 ISCAR