Page 213 - MILLING CATALOG p319-550

RCMT/RCMW/RCCW-FW 7˚ IC830 Rd°
Fully Effective Serrated IC IC928
Inserts with Four Indexing IC808Recommended Machining Data
Orientation Options S IC908
S1 IC910
Dimensions
Tough 1 Hard MILLING INSERTS

Designation IC S S1 • ap fz
4.80 •
RCMT 1004-FW (1) 10.00 3.20 4.80 (mm) (mm/t)
RCMT 1004-FW-F20 (2) 10.00 3.20 6.40 • 2.00-4.00 0.15-0.30
RCMT 1206-FW (1) 12.00 4.00 6.40 •• 2.00-4.00 0.15-0.30
RCMT 1206-FW-F20 (2) 12.00 4.00 6.40 • 2.50-5.00 0.20-0.35
RCMT 1206-FW-T20 (3) 12.00 4.00 7.90 •••• 2.50-5.00 0.20-0.35
RCMT 1607-FW (1) 16.00 5.00 7.90 •• 2.50-5.00 0.20-0.35
16.00 5.00 7.90 •• 3.00-6.00 0.20-0.35
RCMT 1607-FW-F20 (2) 7.90 3.00-6.00 0.20-0.35
7.90 • 3.00-6.00 0.20-0.35
RCMT 1607-FW-T20 (3) 16.00 5.00 9.40 • •• 3.00-6.00 0.20-0.35
RCMW 1607-T-FPW (4) 16.00 5.00 9.40 ••
9.40 • 3.00-6.00 0.20-0.35
RCMW 1607-T-FW (5) 16.00 5.00 9.40 •
• 4.00-8.00 0.20-0.35
RCMT 2009-FW (1) 20.00 6.00 RCMT ...-FW-F20 4.00-8.00 0.20-0.35
20.00 6.00 RCMT ...-FW 4.00-8.00 0.20-0.35
RCMT 2009-FW-F20 (2) 20.00 6.00 4.00-8.00 0.20-0.35
20.00 6.00
RCMT 2009-FW-T20 (3)
RCMW 2009-T-FW (5)

• For cutting speed recommendations, see pages 542-547

(1) For alloyed and stainless steel and exotic materials.

(2) For austenitic stainless steel, exotic materials and aluminum.

(3) For martensitic stainless steel

(4) For hardened steel

(5) For tool and die steel and for cast iron
For tools, see pages: ERW (279) • ERW-M (280) • FRW (281)

RCMW ...-T-FPW RCMW ...-T-FW RCMT ...-FW-T20

RFMT 1905-76 1 IC328 Rd°
Round Milling Inserts 2
3 4 6
5
7
IC928 8

Dimensions IC S Recommended Machining Data

Tough 1 Hard

Designation IC S •• ap fz
5.48 (mm) (mm/t)
RFMT 1905-LM-76 19.74 3.00-8.00 0.15-0.25

• For cutting speed recommendations, see pages 542-547

For tools, see pages: HOF-R07 (219)

529