Page 221 - MILLING CATALOG p319-550
P. 221
HTP LN.. 1006 W1 S IC330
Tangentially Clamped Inserts with L IC830
4 Cutting Edges for Plungers IC808
Tough 1 Hard IC810
RE IC07
Dimensions MILLING INSERTSRecommended
Machining Data
fz
Designation W1 L S RE (mm/t)
6.50 10.50 10.13 1.00 • 0.05-0.15
HTP LNAR 1006 FR (1) 6.50 10.50 10.13 1.00 • 0.05-0.15
HTP LNAR 1006 FR-P 6.50 10.50 9.93 1.00 • • • • 0.10-0.15
HTP LNHT 1006 ER 6.50 10.50 9.93 1.00 • • •
HTP LNHT 1006 ETR 6.50 10.50 9.96 1.00 • • • 0.12-0.20
HTP LNMT 1006 ER (2)
0.08-0.15
• FR-P - For machining aluminum, ER- For general applications, ETR- First priority for hardened steel • For cutting speed recommendations, see pages 542-547
(1) FR - Sharp cutting edge for unstable conditions and for ISO S material
(2) Mounting this insert increases tool diameter by 0.1 mm
For tools, see pages: HTF-R-LN10 (197) • HTP-LN10 (253) • HTP-M-LN10 (253) • HTP-R-LN10 (254)
ER ETR FR, FR-P
ER- For general ETR- First priority FR-P- For machining
applications for hardened steel aluminum
HTP LN.. 1606 S W1 1.2
Tangentially Clamped Inserts with
4 Cutting Edges for Plungers L 45°
RE
45ER
Dimensions Tough 1 Hard Recommended
Machining Data
Designation W1 L S RE IC328 fz
IC928
IC908 (mm/t)
IC810 0.05-0.15
IC910 0.10-0.20
IC07 0.10-0.20
0.10-0.20
HTP LNAR 1606 FR-P 6.50 16.50 12.28 1.20 • 0.08-0.15
HTP LNHT 1606 ER 1.20 • • • •
6.50 16.50 12.07 1.20 • •
HTP LNHT 1606 ETR
6.50 16.50 12.03 -•
HTP LNHT 16061.2X45ER 6.50 16.50 12.04 1.20 •
HTP LNMT 1606 ETR 6.50 16.50 12.04
• FR-P-For machining aluminum, ER- For general applications, ETR- First priority for hardened steel • For cutting speed recommendations, see pages 542-547
For tools, see pages: HTP-R-LN16 (254)
ER ETR
ER- For general ETR- First priority for
applications hardened steel
537