Page 219 - MILLING CATALOG p319-550
P. 219
QT MFW QCS IC882S Rd°
W1 IC330
BLR IC830
Round Segment Double-Sided RE IC808
Inserts for Ball Nose
Milling Cutters MILLING INSERTSL
Dimensions Tough 1 Hard Recommended
Machining Data
fz
Designation RE(1) L W1 S (mm/t)
2.55 • 0.08-0.15
BLR D160-MFW 8.00 13.10 6.10 2.55 • • 0.08-0.15
BLR D160-QCS 8.00 13.10 6.10 2.55 •
BLR D160-QT 8.00 13.10 6.10 0.08-0.15
3.40 • 0.08-0.15
BLR D200-MFW 10.00 16.40 7.60 3.40 • • 0.08-0.15
BLR D200-QCS 10.00 16.40 7.60 3.40 •
BLR D200-QT 10.00 16.40 7.60 0.08-0.15
3.80 • 0.08-0.15
BLR D250-MFW 12.50 20.50 8.90 3.80 • • 0.08-0.15
BLR D250-QCS 12.50 20.50 8.90 3.80 •
BLR D250-QT 12.50 20.50 8.90 •• 0.08-0.15
BLR D300-QCS 15.00 24.50 10.75 4.60 0.08-0.15
4.60 •
BLR D300-QT 15.00 24.50 10.75 0.08-0.15
4.60 • 0.08-0.25
BLR D320-MFW 16.00 26.30 11.00 ••
BLR D320-QCS 16.00 26.30 11.00 4.60 0.08-0.25
4.60 •
BLR D320-QT 16.00 26.30 11.00 0.08-0.25
5.50 • 0.08-0.25
BLR D400-MFW 20.00 32.70 14.20 5.50 • • 0.08-0.25
BLR D400-QCS 20.00 32.70 14.20 7.40 •
BLR D500-MFW 25.00 40.90 17.80 0.08-0.25
7.40 • • 0.08-0.25
BLR D500-QCS 25.00 40.90 17.80
• MFW - Serrated cutting edge for roughing operations • QCS - Chip splitting cutting edge for semi-finish and finish applications • QT - Round edge for finishing
applications • For cutting speed recommendations, see pages 542-547
(1) Radius generated on workpiece
For tools, see pages: BLP Endmills (265) • BLP Shell Mill (266) • BLP-M (266)
S1 W1
BCR lNSL Rd°
Ball Nose Inserts with a
Straight Cutting Edge Tangent Recommended
to a Round Corner Machining Data
CEMR
S QT, CC CS
Dimensions Tough 1 Hard
IC328 ap fz
IC928
Designation CEMR(3) INSL W1 S1 S IC808 (mm) (mm/t)
IC908
BCR D120-QT 6.00 10.60 5.80 2.80 2.10 • • • 1.20-4.20 0.20-0.25
4.40 • 1.60-5.60
BCR D160-QT 8.00 12.70 7.70 4.70 3.30 • 0.20-0.25
4.70
BCR D200-CC (1) 10.00 17.00 9.60 5.70 3.60 2.00-7.00 0.20-0.25
7.00 • 2.00-7.00
BCR D200-QT 10.00 17.00 9.60 7.00 3.60 0.20-0.25
7.00 4.20 • • • 2.50-8.75
BCR D250-QT 12.50 20.00 11.80 9.40 5.30 • • 0.20-0.25
9.74
BCR D300-QT 15.00 27.30 14.70 11.70 3.00-10.50 0.20-0.25
• 3.20-11.20
BCR D320-CS (2) 16.00 28.00 15.00 5.30 0.20-0.25
5.30 • • • 3.20-11.20
BCR D320-QT 16.00 28.00 15.10 • 4.00-14.00 0.20-0.25
BCR D400-CS (2) 20.00 35.40 18.80 6.30 0.20-0.25
7.00 •
BCR D400-QT 20.00 35.40 18.80 4.00-14.00 0.20-0.25
• 5.00-17.50
BCR D500-CS (2) 25.00 44.00 24.00 9.00 0.20-0.25
• For cutting speed recommendations, see pages 542-547
(1) Center Cutting
(2) Not recommended for stainless steel and high temperature alloys
(3) Radius generated on workpiece
For tools, see pages: BCM (267) • BCM-M (268) • BCM-MM (268)
535
