Page 43 - MILLING CATALOG p319-550

SDN-CALN11 DHUB CDX SLOTTING & SLITTING CUTTERS
Full Slot Disk Type Slotting DCONMS
Cutters with Cartridges
Carrying Tangentially Mounted OAL CW
LN.. 1106.. Inserts
DC

Designation CWN(1) CWX(2) CDX(3) DC DHUB DCONMS CICT(4) ZEFP OAL kg

SDN D100-1419-27-CALN11 14.00 19.50 26.80 100.00 42.00 27.00 6 3 20.00 0.58
40.00 8 4 20.00 0.90
SDN D125-1419-40-CALN11 14.00 19.50 31.50 125.00 56.00 40.00 10 5 22.00 1.51
50.00 14 7 22.00 2.38
SDN D160-1419-40-CALN11 14.00 19.50 48.00 160.00 56.00 60.00 16 8 26.00 3.88

SDN D200-1419-50-CALN11 14.00 19.50 61.00 200.00 70.00

SDN D250-1419-60-CALN11 14.00 19.50 78.00 250.00 85.00

• Each cutter body can be changed into full slot, bottom or top milling configuration by mounting the cartridges accordingly
• Half of the inserts are used on right-hand cartridges and half on left-hand cartridges • Gang-mill assembly SDN and left-hand SSB cutters feature two keyways
• To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position. • For cartridge details, see page 363
(1) Minimum cutting width • The cutter will be set to the minimum width range, unless a specific width is requested by the user
(2) Maximum cutting width
(3) Cutting depth maximum
(4) Number of inserts
For inserts, see pages: LNAR 1106 (482) • LNHT 1106 PN-N HT (482) • LNHT 1106 PN-R HT (481) • LNKX/LNMT 1106 (481)

Spare Parts CA90 1419-R/L-LN11

Designation
SDN-CALN11

SDN-CALN13 CDX DHUB
Full Slot Adjustable Slotting DCON
Cutters with Cartridges Carrying
T490 LNHT 1306PNTR/L Inserts CW OAL

DC

Designation DC OAL CWN(1) CWX(2) CDX(3) CICT(4) ZEFP DHUB DCON kg

SDN D125-1723-40-CALN13 126.00 26.00 17.50 23.00 32.00 8 4 56.00 40.00 1.13
10 1.90
SDN D160-1723-40-CALN13 161.00 26.00 17.50 23.00 49.50 14 5 56.00 40.00 3.01
16 4.82
SDN D200-1723-50-CALN13 201.00 26.00 17.50 23.00 61.00 16 7 70.00 50.00 4.83

SDN D250-1723-50-CALN13 251.00 26.00 17.50 23.00 86.00 8 70.00 50.00

SDN D250-1723-60-CALN13 251.00 26.00 17.50 23.00 78.00 8 85.00 60.00

• Each cutter body can be changed into full slot, bottom or top milling configuration by mounting the cartridges accordingly
• Half of the inserts are used on right-hand cartridges and half on left-hand cartridges • Gang-mill assembly SDN and left-hand SSB cutters feature two keyways
• To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position. • For cartridge details, see page 363
(1) Minimum cutting width • The cutter will be set to the minimum width range, unless a specific width is requested by the user
(2) Maximum cutting width
(3) Cutting depth maximum
(4) Number of inserts
For inserts, see pages: T490 LNMT/LNHT/LNAR 1306 (478)

Nut

Cartridge Screw

Right Hand Cartridge T490 LNHT 1306...Insert
CA90 1723-R/L-T490-13 Insert Screw

Spare Parts

Designation
SDN-CALN13

359