Page 45 - MILLING CATALOG p319-550
P. 45
SDN-CALN15 DHUB CDX SLOTTING & SLITTING CUTTERS
Full Slot Disk Type Slotting DCONMS
Cutters with Cartridges
Carrying Tangentially Mounted OAL CW
LN.. 1506.. Inserts
DC
Designation CWN(1) CWX(2) CDX(3) CICT(4) ZEFP DC DHUB DCONMS OAL kg
SDN D125-1925-40-CALN15 18.90 25.60 32.50 8 4 125.00 56.00 40.00 26.00 0.39
SDN D160-1925-40-CALN15 18.90 25.60 48.50 10 0.00
61.50 14 5 160.00 56.00 40.00 26.00 3.03
SDN D200-1925-50-CALN15 18.90 25.60 79.00 16 4.80
SDN D250-1925-60-CALN15 18.90 25.60 7 200.00 70.00 50.00 26.00
8 250.00 85.00 60.00 26.00
• Each cutter body can be changed into full slot, bottom or top milling configuration by mounting the cartridges accordingly
• Half of the inserts are used on right-hand cartridges and half on left-hand cartridges • Gang-mill assembly SDN and left-hand SSB cutters feature two keyways.
• To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position. • For cartridge details, see page 363
(1) Minimum cutting width • The cutter will be set to the minimum width range, unless a specific width is requested by the user
(2) Maximum cutting width
(3) Cutting depth maximum
(4) Number of inserts
For inserts, see pages: LNKX 1506PN-N PL (486) • LNKX/LNMT 1506PNTN/PN-N MM (486) • LNMT/LNHT 1506...-N HT (488) • LNMW 1506 PNTN (486)
Spare Parts SDN-CALN
CA90 1928-R/L-LN15
Designation
SDN-CALN15
FST DHUB
Top-Side Cutting, Flanged DCONMS
Type Slotting Cutters
CDX LU_2 OAL
LU
DC APMX
Designation DC APMX CICT(1) CDX(2) DHUB DCONMS LU_2 LU OAL Arbor(3)
FST D100-12-27-R10 100.00 9.00 11 25.00 55.00 27.00 17.5 12.00 40.00 B SR 14-544/S T-15/51
FST D125-12-32-R10 125.00 9.00 B SR 14-544/S T-15/51
13 34.00 65.00 32.00 20.0 12.00 45.00
(1) Number of inserts
(2) Cutting depth maximum
(3) For adaptation options, see page 548
For inserts, see pages: ADKR 1505PDR/L-HM (456) • ADKT 1505..R/L-HM (459) • ADKT 1505PDR/L-HM (458) • ADKT 1505PDTR/L-RM (458)
• QDCT-PDN (497) • QDMT 1205..PDTN-M (498) • QPMT 100408PDTN (495) • XPMT-HQ (496)
361
