Page 44 - MILLING CATALOG p319-550

SLOTTING & SLITTING CUTTERS SDN-CAPM15 CDX DHUB
Full Slot Adjustable Slotting DCON
Cutters with Cartridges Carrying CW OAL
LNAT 1506...-PM Inserts DC

Designation DC OAL CWN(1) CWX(2) CDX(3) CICT(4) ZEFP DHUB DCON kg

SDN D125-1925-40-CAPM15 125.00 26.00 18.90 25.60 32.50 8 4 56.00 40.00 1.30
10
SDN D160-1925-40-CAPM15 160.00 26.00 18.90 25.60 48.50 16 5 56.00 40.00 1.90

SDN D250-1925-60-CAPM15 250.00 26.00 18.90 25.60 79.00 8 85.00 60.00 4.81

• Each cutter can be changed into full slot, bottom or top milling configuration • Use A type cartridges for inserts with 0.8-1.6 mm radii, B type cartridges for inserts with
2.5-3.2 mm radii and C type cartridges for insertswith 4.0 mm radius
• Each cutter features two keyways. • To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
• For cartridge details, see page 363
(1) Minimum cutting width • The cutter will be set to the minimum width range, unless a specific width is requested by the user
(2) Maximum cutting width
(3) Cutting depth maximum
(4) Number of inserts
For inserts, see pages: LNAT 1506-PM (490)

Spare Parts CA90 1928-R/L-PM15-A CA90 1928-R/L-PM15-B* CA90 1928-R/L-PM15-C*

Designation
SDN-CAPM15

* Optional, should be ordered separately

SDN DHUB
Full Slot Disk Type Slotting Cutters DCONMS

OAL CW

CDX
DC

Designation DC CW CICT(1) ZEFP CDX(2) DHUB DCONMS OAL
27.00 12.00
SDN D080-08-27-06 80.00 8.00 12 6 17.00 41.00 32.00 12.00
SDN D100-08-32-06 100.00 8.00 14 32.00 14.00
7 24.00 47.00 40.00 16.00
40.00 16.00
SDN D100-10-32-06 100.00 10.00 14 7 24.00 47.00 40.00 20.00
SDN D125-12-40-10 125.00 12.00 12 40.00 20.00
SDN D160-12-40-10 160.00 12.00 14 6 33.00 55.00 50.00 24.00
SDN D160-16-40-10 160.00 16.00 14 50.00 26.00
SDN D160-16-40-12 160.00 16.00 12 7 50.00 55.00

7 50.00 55.00

6 50.00 55.00

SDN D200-18-50-12 200.00 18.00 14 7 50.00 69.00
SDN D200-20-50-12 200.00 20.00 14
7 63.00 69.00

• For user guide, see pages 377-383

(1) Number of inserts

(2) Cutting depth maximum

For inserts, see pages: QDCT-PDN (497) • QDMT 1205..PDTN-M (498) • QOMT-HQ (494) • QPMT 100408PDTN (495) • XOMT-HQ (494)

• XPMT-HQ (496)

Spare Parts SR 34-514 T-7/51
SR 34-514 T-7/51
Designation SR 34-514 T-7/51
SDN D080-08-27-06 SR 14-544/S T-15/51
SDN D100-08-32-06 SR 14-544/S T-15/51
SDN D100-10-32-06 SR 14-544/S T-15/51
SDN D125-12-40-10 SR 34-510
SDN D160-12-40-10 SR 34-510 PN 3-4 BLD T15/M7 SW6-T
SDN D160-16-40-10 SR 34-510 PN 3-4 BLD T15/M7 SW6-T
SDN D160-16-40-12 PN 3-4 BLD T15/M7 SW6-T
SDN D200-18-50-12
SDN D200-20-50-12

360 ISCAR