Page 51 - MILLING CATALOG p319-550

TAG N-J/JS/JT JT JIC830
Single-Ended Inserts for IC928
Parting, Grooving and CW REIC1030
Slitting Soft Materials 7ºIC5400
IC1010
Dimensions IC808Tough 1 Hard Recommended
IC908 Machining Data
IC20
Designation CW RE CWTOL(2) RETOL(3) IC807 f groove
1.40 0.16 0.04 0.030 • ••
TAG N1.4J 1.60 0.16 0.04 0.030 • SLOTTING & SLITTING CUTTERS• (mm/rev)
TAG N1.6J 2.00 0.02 0.04 0.020 • • 0.03-0.10
TAG N2JS (1) 2.00 0.20 0.04 0.040 • • • • • • 0.03-0.12
TAG N2J 2.00 0.20 0.04 0.040 • • • • • 0.03-0.08
TAG N2JT 3.05 0.02 0.04 0.020 • • 0.04-0.12
TAG N3JS (1) 3.05 0.20 0.04 0.030 • • • • • • • • • 0.04-0.14
TAG N3J 3.05 0.20 0.04 0.030 • • •• 0.04-0.10
TAG N3JT 3.25 0.20 0.04 0.030 • • 0.04-0.16
TAG N3.2JT 4.00 0.24 0.04 0.030 • • • • • • • • 0.05-0.18
TAG N4J 4.05 0.24 0.04 0.030 • • •• 0.05-0.18
TAG N4JT 0.04-0.18
0.06-0.20

• JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds.

• For cutting speed recommendations and user guide, see pages 542-547

(1) Sharp corners cannot be used on TGSF slitting cutters

(2) Cutting width tolerance (+/-)

(3) Corner radius tolerance (+/-)

For tools, see pages: TGSF (364) • TGSF-JHP (365) • TGSF-M-JHP (365) • TGSF-MM-JHP (366)

TAG N-A CW RE 10°
Single-Ended Inserts for Parting,
Grooving and Slitting Aluminum 7°

Dimensions Recommended
Machining Data
Designation CW RE CWTOL(1) RETOL(2) IC20
0.040 f groove
TAG N2A 2.00 0.20 0.04 0.040 (mm/rev)
TAG N3A 3.00 0.20 0.04 0.030
TAG N4A 4.00 0.24 0.04 • 0.02-0.10
• 0.03-0.14
• 0.03-0.16

• For cutting speed recommendations and user guide, see pages 542-547
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • TGSF (364) • TGSF-JHP (365) • TGSF-M-JHP (365) • TGSF-MM-JHP (366) • TGSF (364)

367