Page 53 - MILLING CATALOG p319-550
P. 53
GFT-J CW IC1028
Thin Parting, Grooving RE IC1008
and Slitting Single-Ended
Inserts for Soft Materials Dimensions Tough 1 Hard Recommended Machining DataSLOTTING & SLITTING CUTTERS
Designation CW RE •• f groove
GFT 0.6J-0.1 ••
GFT 0.8J-0.1 0.60 0.10 •• (mm/rev)
GFT 1.0J-0.1 0.80 0.10 •• 0.03-0.05
GFT 1.2J-0.14 1.00 0.10 •• 0.03-0.07
GFT 1.6J-0.16 1.20 0.14 0.03-0.09
1.60 0.16 0.03-0.10
For tools, see pages: • SGST (368) 0.03-0.12
SGSF-W DC OAL CW
Grooving and Slitting Cutters DCONMS LH CDX
with Integral Weldon Shanks
THUB
OHX
Designation CWN(2) CWX(3) DC DCONMS CDX(4) NOF(5) THUB LH(6) OHX(7) OAL MIID(8)
SGSF 32-1.6-W16 1.50 1.79 32.00 16.00 7.00 3 1.32 20.0 49.0 100.00 GSFN 1.6 ESG 1.4-2
SGSF 32-2-W16 (1) 3 1.62 20.0 49.0 100.00 GSFN 2 ESG 1.4-2
1.80 2.69 32.00 16.00 7.00 4 1.32 34.0 63.0 100.00 GSFN 1.6 ESG 1.4-2
SGSF 40-1.6-W16 4 1.62 34.0 63.0 100.00 GSFN 2 ESG 1.4-2
SGSF 40-2-W16 (1) 1.50 1.79 40.00 16.00 11.00
1.80 2.69 40.00 16.00 11.00
• For user guide, see pages 377-383
(1) Standard GSFN 2.4 mm inserts are not suitable for this tool; for suitable tool, see specific pocket size.
(2) Minimum cutting width
(3) Maximum cutting width
(4) Cutting depth maximum
(5) Number of flutes
(6) Minimum overhang range
(7) Maximum overhang range
(8) Master insert identification
For inserts, see pages: GSFN (373) • GSFU (373)
369