Page 49 - MILLING CATALOG p319-550

TGSF-JHP CW DCONMS Bar Max SLOTTING & SLITTING CUTTERS
Slitting Cutters with WB
Coolant Channels Carrying Screw DC
TANG-GRIP Inserts DHUB CDX

Designation CW DC CICT(1) WB DHUB DCONMS CDX RPMX(2) MIID(3)
32.00 10.00 14.00 5000 TAG N3C
TGSF 63-3-10K-JHP 3.00 63.00 6 2.50 40.00 22.00 19.00 3900 TAG N3C ETG 3-4-SH*
TGSF 80-3-22K-JHP 3.00 80.00 6 2.50 40.00 22.00 29.00 3820 TAG N3C ETG 3-4-SH*
TGSF 100-3-22K-JHP 3.00 100.00 6 2.50 55.00 32.00 34.00 3820 TAG N3C ETG 3-4-SH*
TGSF 125-3-32K-JHP 3.00 125.00 8 2.50 32.00 10.00 14.00 5000 TAG N4C ETG 3-4-SH*
TGSF 63-4-10K-JHP 4.00 63.00 6 3.30 40.00 22.00 19.00 3900 TAG N4C ETG 3-4-SH*
TGSF 80-4-22K-JHP 4.00 80.00 6 3.30 40.00 22.00 29.00 3820 TAG N4C ETG 3-4-SH*
TGSF 100-4-22K-JHP 4.00 100.00 6 3.30 55.00 32.00 34.00 3820 TAG N4C ETG 3-4-SH*
TGSF 125-4-32K-JHP 4.00 125.00 8 3.30 ETG 3-4-SH*

• ETG extractor should be ordered separately
(1) Number of inserts
(2) Maximum RPM
(3) Master insert identification
* Optional, should be ordered separately
For inserts, see pages: TAG N-A (367) • TAG N-C/W/M (366) • TAG N-J/JS/JT (367)
For holders, see pages: SW/S-JHP (365)

SW--JHP Type S--JHP Type
LF
SW/S-JHP Bar Max
Drive Shanks with Coolant
Channels for TANG-GRIP Screw BD DBC DCONWS DCONMS DBC DCONWS DCONMS BD
Slitting Cutters Pin LB

LF

Designation DCONMS BD DBC DCONWS LB LF kg
32.00 110.00
SW 25-32-JHP 25.00 40.00 25.40 10.00 25.00 120.00 0.43 SR 76-961 T-15/5
SW 32-40-JHP 32.00 55.00 60.00
32.00 32.50 22.00 30.00 0.77 SR 76-963 T-15/5
S 32-55-JHP
45.00 32.00 - 0.83 SR 76-943 SR M16X40-JHP T-20/5

For tools, see pages: TGSF-JHP (365)

TGSF-M-JHP OAL LF CW
Grooving and Slitting Small THSZMS CDX
Diameter Cutters with FLEXFIT
Threaded Adaptation DCONMS DC Bar Max

DRVS

Designation DC CW CDX CICT(1) DCONMS THSZMS LF OAL DRVS(2) Insert TQ_3(3)

TGSF 50-2-M12 5Z-JHP 50.00 2.00 13.00 5 21.00 M12 10.80 24.00 17.0 TAG 2 33 ETG 2*

TGSF 50-3-M12 5Z-JHP 50.00 3.00 13.00 5 21.00 M12 10.70 24.70 17.0 TAG 3 33 ETG 3-4-SH*

• For best performance use internal coolant with "CH" type shanks • When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and
threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the
TQ_3 parameter
(1) Number of inserts
(2) Torque key size
(3) Tool tightening torque Nxm (lbfxin)
* Optional, should be ordered separately
For inserts, see pages: TAG N-A (367) • TAG N-C/W/M (366) • TAG N-J/JS/JT (367)
For holders, see pages: BT-ODP (FLEXFIT) (314) • C#-ODP (FLEXFIT) (314) • CAB M-M (FLEXFIT) (312) • DIN69871-ODP (315) • ER-ODP (315)
• HSK A-ODP (FLEXFIT) (316) • S M (312) • S M-C-H (312) • S M-CF (313)

365