Page 69 - MILLING CATALOG p319-550

HSM90S EAL-14 DC DCONMS Rd° CUTTERS FOR ALUMINUM
Long Reach Endmills Carrying
HSM90S APCR 1405... Inserts
for Machining Aluminum

APMX

LH OAL

Designation DC APMX(1) CICT(2) LH OAL DCONMS RPMX(3) RMPX°(4) kg

HSM90S EAL-D32-2-C32-14 32.00 13.50 2 80.0 200.00 32.00 37500 10.0 1.02 SR M5X0.8IP20-1S BLD IP20/M7 SW6-T-SH

• Important: When machining at very high cutting speeds and the insert needs replacing, it is also recommended to replace the screw

• Insert tightening torque: 6 (Nxm)

(1) D.O.C. changes according to insert radius. APMX 13.5 is the value for HSM90S APCR 140550R-P insert

For inserts with a corner radius larger than
5.0 mm, the corner of the pocket must
be modified according to the drawing.

R body= R insert +0.5 mm

HSM90S FAL-14 DHUB Rd°
90° Face Mills Carrying Super DCONMS
Positive and Polished Rake
Inserts for Machining Aluminum OAL
at High Rotation Speeds APMX
DC

Designation DC CICT(1) APMX(2) OAL DHUB DCONMS Arbor(3) RMPX°(4) RPMX(5) kg
8.0 38000
HSM90S FAL-D050-2-22-14 50.00 2 13.50 57.00 47.00 22.00 A 8.0 38000 0.43
HSM90S FAL-D050-3-22-14 50.00 3 13.50 57.00 47.00 22.00 A 7.0 33000 0.42
50.00 4 13.50 57.00 47.00 22.00 A 0.43
HSM90S FAL-D050-4-22-14

• Important: When machining at very high cutting speeds and the insert needs replacing, it is also recommended to replace the screw

• Insert tightening torque: 6 (Nxm)

(1) Number of inserts

For inserts with a corner radius larger than
5.0 mm, the corner of the pocket must
be modified according to the drawing.

R body= R insert +0.5 mm

Spare Parts SR M5X0.8IP20-1 BLD IP20/M7 SW6-T-SH SR M10X40DIN912

Designation
HSM90S FAL-14

385