Page 73 - MILLING CATALOG p319-550

HM90 FAL-15 DHUB Rd° CUTTERS FOR ALUMINUM
Face Mills Carrying HM90 DCONMS
AXCR 1505.. Inserts for kg
Machining Aluminum OAL 0.30
APMX
DC

Designation DC CICT(1) APMX OAL DHUB DCONMS Arbor(2) RPMX(3) RMPX°(4)
4 14.00 45.00 49.00 22.00 A 23000 6.5
HM90 FAL-D050-4-22-15 50.00

(1) Number of inserts

(2) For adaptation options, see page 548

(3) Maximum RPM

(4) Maximum ramping angle

For inserts, see pages: HM90 AXCR 1505 (465)

Spare Parts SR 14-562 BLD T10/S7 SW6-SD SR M10X25 DIN912

Designation
HM90 FAL-15

DHUB Rd°
DCONMS
HM90 FAL-22 OAL
Face Mills Carrying HM90 DC APMX
APCR 2206... Inserts for
Machining Aluminum

Designation DC APMX CICT(1) OAL DHUB DCONMS Arbor(2) RMPX°(3) RPMX(4) MIID(5) kg

HM90 FAL-D063-27-22 63.00 22.00 3 50.00 62.00 27.00 A 7.0 16000 HM90 APCR 220605R-P 0.48
5.0 0.81
HM90 FAL-D080-27-22 80.00 22.00 3 50.00 70.00 27.00 A 14000 HM90 APCR 220605R-P

• D.O.C. changes according to insert radius • APMX 20.5 is the value for HM90 APCR220650 • Insert tightening torque: 6 Nxm
• When using this cutter with a 6.4 mm radius insert, the seat must be changed to assure the insert's compatibility with the tool
• For user guide, see pages 542-547
(1) Number of inserts
(2) For adaptation options, see page 548
(3) Maximum ramping angle
(4) Maximum RPM
(5) Master insert identification
For inserts, see pages: HM90 APCR 2206..R-P (467) • HM90 APCR 220605-CS (467)

Spare Parts SR 14-0180 BLD T20/M7 SW6-T SR DIN 912 M12X25
Designation
HM90 FAL-22 DHUB Rd°
DCONMS
HSM90S FAL-22
90° Face Mills Carrying Super OAL
Positive and Polished Rake APMX
Inserts for Machining Aluminum DC
at High Rotation Speeds

Designation DC APMX CICT(1) DCONMS DHUB OAL Arbor(2) RMPX°(3) RPMX(4) MIID(5) kg
HSM90S APCR 2207
HSM90S FAL-D050-3-22-22 50.00 22.00 3 22.00 48.00 57.00 A 7.0 31000 HSM90S APCR 2207 0.40
7.0 31000 0.41
HSM90S FAL-D050-4-22-22 50.00 22.00 4 22.00 48.00 57.00 A

• Important: When machining at very high cutting speeds and the insert needs replacing, it is also recommended to replace the screws
• Insert tightening torque: 9 (Nxm)
(1) Number of inserts
(2) For adaptation options, see page 548
(3) Maximum ramping angle
(4) Maximum RPM
(5) Master insert identification
For inserts, see pages: HSM90S APCR 2207 (467)

Spare Parts SR M5x0.8 20IP-13343 BLD IP20/M7 SW6-T-SH SR M10X40DIN912

Designation
HSM90S FAL-22

389