Page 70 - MILLING CATALOG p319-550
P. 70
CUTTERS FOR ALUMINUM Rd°
HM90 EAL-16 DC DCONMS
Long Reach Endmills Carrying
HM90 APCR 1605 Inserts APMX
for Machining Aluminum LH
OAL
Designation DC CICT(1) APMX(2) LH OAL DCONMS Shank(3) RPMX(4) RMPX°(5) kg
HM90 EAL-D25-C24L180-16 25.00 1 15.50 - 180.00 24.00 C 7000 25.9 0.56
HM90 EAL-D25-C25L125-16 25.00 1 15.50 69.0 125.00 25.00 C 7000 25.9 0.38
HM90 EAL-D25-C25L200-16 25.00 1 15.50 65.0 200.00 25.00 C 7000 25.9 0.62
HM90 EAL-D32-C32L150-16 32.00 2 15.50 90.0 150.00 32.00 C 45643 22.4 0.74
HM90 EAL-D32-C32L200-16 32.00 2 15.50 80.0 200.00 32.00 C 45643 22.4 1.02
HM90 EAL-D40-C32L220-16 40.00 2 15.50 45.0 220.00 32.00 C 36809 16.9 1.28
• Insert tightening torque: 600 Nxcm • HM90 APCR 1605..R-P inserts with corner radii 3.2 and 4.0 mm require pocket modification, corners larger than 4.5 mm should be
used only on BR tools.
• For user guide, see pages 542-547
(1) Number of inserts
(2) D.O.C. changes according to insert radius. APMX 15.5 is the value for HM90 APCR 160520R-P insert
(3) C-Cylindrical
(4) Maximum RPM
(5) Maximum ramping angle
For inserts, see pages: HM90 APCR 1605..R-P (466)
Spare Parts
Designation SR 14-592SM BLD T20/S7 SW6-T
SR 14-592SM BLD T20/S7 SW6-T
HM90 EAL-D25-C24L180-16 SR 14-592SM BLD T20/S7 SW6-T
HM90 EAL-D25-C25L125-16 SR 14-0180 BLD T20/M7 SW6-T
HM90 EAL-D25-C25L200-16 SR 14-0180 BLD T20/M7 SW6-T
HM90 EAL-D32-C32L150-16 SR 14-0180 BLD T20/M7 SW6-T
HM90 EAL-D32-C32L200-16
HM90 EAL-D40-C32L220-16
HM90 EAL-HSK63A-16 DC Shank Rd°
Long Reach Endmills with DCONMS
Integral HSK Adaptation Carrying 4xM6 threaded holes for balancing screws G2.5
HM90 APCR 1605... Inserts APMX Max. RPM
for Machining Aluminum LU U<1.0 gmm
LH LF
Designation DC APMX(1) LU LH LF ZEFP RPMX(2) RMPX°(3) DCONMS Shank CDI kg
HM90 EAL32-L100-HSK63A-16 32.00 15.50 97.0 100.00 126.00 2 45600 22.0 63.00 HSK A 63 1 1.06
• Insert tightening torque: 600 Nxcm • HM90 APCR 1605..R-P inserts with corner radii 3.2 and 4.0 mm require pocket modification, corners larger than 4.5 mm should be
used only on BR tools
• A cooling tube must be used with all internal coolant HSK spindles (should be ordered separately) • Kit balancing screws should be ordered separately
• For user guide, see pages 542-547
(1) D.O.C. changes according to insert radius. APMX 15.5 is the value for HM90 APCR 160520R-P insert
(2) Maximum RPM
(3) Maximum ramping angle
For inserts, see pages: HM90 APCR 1605..R-P (466)
Spare Parts SR 14-0180 BLD T20/M7 SW6-T
Designation
HM90 EAL-HSK63A-16
386 ISCAR