Page 74 - MILLING CATALOG p319-550

CUTTERS FOR ALUMINUM HSM90SFD-HSK A63/80-22 LH LF DCONMS Rd°
90° Endmills with Integral LU
HSK Adaptation Carrying G2.5
Super Positive Inserts for DC 31,000 RPM
Machining Aluminum at U<1.0 gmm
High Rotation Speeds APMX
6 x M6 threaded holes for balancing screws

Designation DC APMX LU LH LF CICT(1) DCONMS Shank RMPX°(2) RPMX(3) CDI(4) kg
31000 1
HSM90SFD50-3-63A/80MQL-22 50.00 22.00 73.10 84.0 110.00 3 80.00 HSK A63/80 7.0 31000 1 0.50
0.50
HSM90SFD50-4-63A/80MQL-22 50.00 22.00 73.10 84.0 110.00 4 80.00 HSK A63/80 7.0

• A cooling tube must be used with all internal coolant HSK spindles (should be ordered separately)
• Important: When machining at very high cutting speeds and the insert needs replacing, it is also recommended to replace the screws
• Kit balancing screws should be ordered separately • Insert tightening torque: 9 (Nxm)
(1) Number of inserts
(2) Maximum ramping angle
(3) Maximum RPM
(4) 1 - Hole for data chip, 0 - Without hole for data chip
For inserts, see pages: HSM90S APCR 2207 (467)

Spare Parts SR M5x0.8 20IP-13343 BLD IP20/M7 SW6-T-SH COOLING TUBE HSK A63

Designation
HSM90SFD-HSK A63/80-22

390 ISCAR