Page 114 - TURNING CATALOG p121-254

ISOTURN INSERTS 60º 22°MAX

TNGA-M3 (CBN) LE Typ. x 3 91º 93º 91º
Triangular Inserts with 3 CBN L S
Tips for Machining Hardened 95º 91º 55°
Steel, Sintered Metals and IC MAX
High Temperature Alloys
60º

Dimensions Tough 1 Hard Recommended Machining Data

IB10S ap f
IB20H
Designation L IC S RE LE (mm) (mm/rev)
16.50 9.52 4.76 0.40 2.2 • 0.05-0.30
TNGA 160404-M3 16.50 9.52 4.76 0.80 •• 0.10-0.50 0.05-0.30
TNGA 160408-M3 16.50 9.52 4.76 1.20 0.05-0.30
TNGA 160412-M3 1.9 0.05-0.50
2.4 •
0.10-0.50

• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: A-PTFNR/L-X/G (108) • DTGNR/L (44) • MTENN-W (38) • MTJNR/L-W (38) • PTFNR/L (37) • PTGNR/L (35) • PTGNR/L-X (36)

• PTGNR/L-X-JHP (36) • PTGNR/L-X-JHP-MC (37) • S-MTLNR/L-W (109) • S-PTFNR/L (109)

TCMT (CBN) 60° 91º 91º 95º
Triangular Positive Inserts with RE LE 91º
a Single CBN Flat Rake Tip for
Machining Hardened Steel L Recommended
Machining Data
IC D1
7°

S

Dimensions Tough 1 Hard

IB90 IB55 ap f
IB50 IB50
Designation L IC S RE LE D1 • • (mm) (mm/rev)

TCMT 110204T 11.00 6.35 2.38 0.40 3.5 2.85 0.05-0.50 0.05-0.13

• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: E-STFCR-HEAD (115) • S-STFCR/L (115) • S-STLCR/L (115) • STFCR/L (70) • STGCR/L (70)

TPGX (CBN) 60° 11° 91º
Triangular Inserts with CBN RE LE D1
Single Top Corner Brazed Tip, Recommended
11° Clearance for Machining IC Machining Data
Cast Iron and Hardened Steel

LS

Dimensions Tough 1 Hard

ap f

Designation L IC S RE LE D1 • • (mm) (mm/rev)

TPGX 090202T 9.52 5.56 2.38 0.20 2.5 2.50 • • 0.05-0.50 0.03-0.20
TPGX 090204T 9.52 5.56 2.38 0.40
2.6 2.50 • • 0.05-0.50 0.03-0.20
TPGX 110302T 11.00 6.35 3.18 0.20
TPGX 110304T 11.00 6.35 3.18 0.40 3.3 3.50 • • 0.05-0.50 0.03-0.20

3.0 3.50 0.05-0.50 0.03-0.20

• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: A/E-STFPR-X (117) • MG STFPR-X (117)

234 ISCAR