Page 110 - TURNING CATALOG p121-254
P. 110
ISOTURN INSERTS DNGG-M4HF/M4HM (CBN) 55º L Typ. x 4 60° 27° 93º-95º
55° Rhombic Inserts with 4 LE MAX MAX 50º
Chipbreaking CBN Tips for 62.5º MAX
Machining Hardened Steel 93º
IC
RE S
Dimensions Recommended Machining Data
Designation L IC S RE LE IB25HA ap f
DNGG 150408-M4HF 15.50 12.70 4.76 0.80 2.1 • (mm) (mm/rev)
2.0 • 0.20-0.75 0.05-0.20
DNGG 150412-M4HM 15.50 12.70 4.76 1.20 0.50-1.00 0.05-0.20
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: C#-DDJNR/L (31) • C#-PDJNR/L-JHP (29) • HSK A63WH-DDJNR/L (31) • HSK A63WH-DDNNN (31) • PDJNR/L (28)
• PDJNR/L-JHP (29) • S-DDUNR/L (106) • DDJNR/L-JHP-MC (30)
RE 55° 107.5° 29°
LE L 7° MAX 93º-95º
DCMT (CBN) D1
55° Rhombic Inserts with 91° 50º
a Single CBN Top Corner IC S MAX
Tip and 7° Clearance for 27°
Machining Hardened Steel MAX 60°
MAX
93º 62.5º
Dimensions Recommended Machining Data
IB05S ap f
IB20H
Designation L IC S RE LE D1 IB20HC (mm) (mm/rev)
4.40 • 0.05-0.50 0.05-0.20
DCMT 11T304T 11.60 9.52 3.97 0.40 3.4 IB554.40 • 0.05-0.50 0.05-0.20
IB10H
DCMT 11T308T 11.60 9.52 3.97 0.80 3.1 IB10HC
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/E/S-SDUCR/L (112) • AVC-SDUCR/L (95) • AVC-SDUCR/L-VH (98) • C#-SDJCR-JHP (59) • C#-SDJCR/L (59)
• C#-SDNCN (64) • NQCH-SDACR/L-S-JHP (60) • NQCH-Y-SDJCR-S-JHP (58) • PDACR/L-JHP (62) • PDACR/L-S (57) • SDACR/L (60) • SDHCR/L (59)
• SDJCR/L (58) • SDNCN (64) • Y-SDJCR (58) • Y-SDJCR-JHP (58) • PDACR/L-JHP-MC (62)
DCGW/DCMW-2 (CBN) RE 55° 29° 27°
55° Positive Rhombic Inserts LE L MAX 93º-95º MAX
with 2 CBN Tips for Machining
Hardened Steel, Sintered Metals 7° 91° 50º 93º
and High Temperature Alloys MAX
60°
IC D1 MAX
62.5º
Dimensions S Recommended
Machining Data
Tough 1 Hard
Designation L IC S RE LE D1 •• ap f
DCGW 070202-F2 7.70 6.35 2.38 0.20 2.5 2.80 •• (mm) (mm/rev)
0.05-0.50 0.05-0.30
DCGW 070204-F2 7.70 6.35 2.38 0.40 2.5 2.80 •• 0.05-0.50 0.05-0.30
0.05-0.50 0.05-0.30
DCGW 11T302-F2 11.60 9.52 3.97 0.20 2.5 4.40 •• 0.05-0.50 0.05-0.30
0.05-0.50 0.05-0.30
DCGW 11T304-F2 11.60 9.52 3.97 0.40 2.5 4.40 •• 0.05-0.50 0.05-0.30
0.05-0.50 0.05-0.30
DCGW 11T308-F2 11.60 9.52 3.97 0.80 2.1 4.40 •• 0.05-0.50 0.05-0.30
0.05-0.50 0.05-0.30
DCGW 070202-M2 7.70 6.35 2.38 0.20 2.5 2.80 0.05-0.50 0.05-0.12
7.70 6.35 2.38 0.40 2.5 2.80 • • • 0.05-0.50 0.05-0.30
DCGW 070204-M2 7.70 6.35 2.38 0.80 2.5 2.80 • 0.05-0.50 0.05-0.15
0.05-0.50 0.05-0.30
DCGW 070208-M2 •• 0.05-0.50 0.05-0.30
DCGW 11T302-M2 11.60 9.52 3.97 0.20 2.1 4.40 • ••
DCMW 11T304-M2 11.60 9.52 3.97 0.40 2.5 4.40
4.40 •
DCGW 11T308-M2 11.60 9.52 3.97 0.80 2.1 • ••
DCMW 11T308-M2 11.60 9.52 3.97 0.80 2.1 4.40
4.40 •
DCGW 11T304T01315 11.60 9.52 3.97 0.40 2.5 4.40 •
DCGW 11T304-S2 11.60 9.52 3.97 0.40 2.5
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/E/S-SDUCR/L (112) • AVC-SDUCR/L (95) • AVC-SDUCR/L-VH (98) • C#-SDJCR-JHP (59) • C#-SDJCR/L (59)
• C#-SDNCN (64) • E-SDUCR/L-HEAD (113) • NQCH-SDACR/L-S-JHP (60) • NQCH-Y-SDJCR-S-JHP (58) • PDACR/L-JHP (62) • PDACR/L-S (57)
• SDACR/L (60) • SDHCR/L (59) • SDJCR-PAD (59) • SDJCR/L (58) • SDNCN (64) • Y-SDJCR (58) • Y-SDJCR-JHP (58) • PDACR/L-JHP-MC (62)
230 ISCAR
