Page 119 - TURNING CATALOG p121-254

USER GUIDE ISOTURN INSERTS

ISO-H Hard Materials Turning CBN Content 53.5%
IB10H (fine grain 0.5µm) Binder TiN-Al

Uncoated, fine grain PCBN grade. CBN Content 65%
Binder TiN-Al
Application
Used at medium cutting speed, continuous or light CBN Content 53.5%
interrupted cut on hardened steels. Provides excellent Binder TiN-Al
surface finish. Workpiece hardness range: 50-65 HRC.
CBN Content 75%
IB20H Binder TiN-Al
Uncoated, general purpose PCBN grade. Good balance
between wear and impact resistance. Composed CBN Content 65%
of both fine and medium CBN grain sizes. Binder TiN-Al

Application CBN Content 95%
Continuous to medium interrupted cut on hardened steel. Binder Co-Al-WC

IB10HC CBN Content 95%
TiN coated, PCBN grade with excellent wear Binder Co-Al-WC
resistance. Composed of very fine grain CBN.

Application
Medium to high speed, continuous machining on hardened steel.

IB25HC
Ti (C, N, O) coated grade, composed of medium CBN grain.

Application
High speed, continuous to light interrupted machining.

IB25HA
Ti (C,N,O) coated grade composed of medium CBN grain.

Application
General purpose machining on hardened steel.

ISO-S
IB05S

Super fine, CBN grain with a very high CBN content.

Application
Turning on ferrous sintered metals.

IB10S
A very high CBN content grade, featuring high hardness.

Application
Turning on ferrous sintered metals such as
valve seats and Ti alloys components.

239