Page 63 - TURNING CATALOG p121-254
P. 63
QNMG-GN ICIC830 95º 95° 95°
Double-Sided Inserts L IC8250
with Four 80° Corners for RE S IC8150 45º
General Applications IC428 45º
95º
ISOTURN INSERTS
Dimensions Tough 1 Hard Recommended Machining Data
Designation L IC S RE ap f
0.80 • •
QNMG 090408-GN 10.32 9.52 4.76 0.80 • • • • (mm) (mm/rev)
1.00-4.50 0.16-0.45
QNMG 120408-GN 13.33 12.70 4.76 1.20 • • • • 1.00-4.50 0.16-0.45
1.50-5.00 0.22-0.50
QNMG 120412-GN 13.25 12.70 4.76
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: PQFNR/L (51) • PQLNR/L (50) • PQSNR/L (51) • S-PQFNR/L (100) • S-PQLNR/L (101)
Positive Inserts
CXMG-F3P IC 95º
80° Double-Sided and S 95º
Double-Positive Inserts
with a Positive Rake for L 95º
Finishing on Alloyed Steel
RE
Dimensions Tough 1 Hard Recommended Machining Data
IC8150 ap f
IC807
Designation L IC S RE (mm) (mm/rev)
••
CXMG 090402-F3P 10.40 9.35 4.66 0.20 0.30-2.00 0.03-0.15
0.40 •
CXMG 090404-F3P 10.40 9.35 4.65 •• 0.40-2.00 0.05-0.25
CXMG 12T504-F3P 13.83 12.50 5.80 0.40 •• 0.40-2.00 0.05-0.25
CXMG 12T508-F3P 13.75 12.50 5.80 0.80 0.80-2.00 0.05-0.25
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A-PCLXR/L (99) • AVC-PCLXR/L (96) • PCLXR/L (52) • PCLXR/L-JHP (52) • PCLXR/L-JHP-MC (53) • PCLXR/L-S (52) • PCLXR/L-S-JHP (53)
CXMG-M3P IC 95º
80° Double-Sided and S 95º
Double-Positive Inserts with
a Positive Rake for Medium 95º
Machining on Alloyed Steel
L
RE
Dimensions Tough 1 Hard Recommended Machining Data
IC8250 ap f
IC8150
Designation L IC S RE IC807 (mm) (mm/rev)
CXMG 090408-M3P 10.32 9.35 4.65 0.80 ••• 0.80-3.00 0.10-0.50
•••
CXMG 12T508-M3P 13.75 12.50 5.80 0.80 ••• 0.80-5.00 0.10-0.50
CXMG 12T512-M3P 13.68 12.50 5.80 1.20 1.20-5.00 0.10-0.50
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A-PCLXR/L (99) • AVC-PCLXR/L (96) • PCLXR/L (52) • PCLXR/L-JHP (52) • PCLXR/L-JHP-MC (53) • PCLXR/L-S (52) • PCLXR/L-S-JHP (53)
183