Page 52 - TURNING CATALOG p255-458
P. 52
GROOVE-TURN LH
PHAR/L HF HBH H
External Machining Holders CDX OAL B
for PADR/L Adapters
Right-hand shown
Designation CDX(1) H HF B OAL HBH Adapter(2)
PHAR/L 20 16.30 20.0 20.0 20.0 140.00 10.0 PADR/L 2.4 SR 76-1368 HW 4.0 SR M5-04451 T-20/5
PHAR/L 25
16.30 25.0 25.0 25.0 140.00 5.0 PADR/L 2.4 SR 76-1368 HW 4.0 SR M5-04451 T-20/5
(1) Cutting depth maximum
(2) Adapters to be ordered separately.
For tools, see pages: PADR/L (306)
PADR/L OAH HF
Adapters for GDMW/GDMY
Groove-Turn Inserts WB OAL
CDX
WF
CWN-CWX Left-hand shown
Designation CWN(1) CWX(2) CDX(3) OAL WB HF OAH WF Insert
3.18 16.30 24.0 30.0 4.20 GDMW 2.4
PADR/L 2.4 2.40 41.00 1.90
• For user guide, see pages 419-428, 432-436
(1) Minimum cutting width
(2) Maximum cutting width
(3) Cutting depth maximum
For inserts, see pages: GDMW 2.4 (306)
For holders, see pages: PHAR/L (306)
GDMW 2.4 ±0.1 20 Ref.
Utility Double-Ended
Inserts for External Turning, 7˚ 5.5
Grooving and Parting
CW RE BW
Dimensions Tough 1 Hard Recommended Machining Data
IC830 ap f turn f groove
IC808
Designation CW RE CWTOL(1) RETOL(2) BW CDX(3) IC908 (mm) (mm/rev) (mm/rev)
IC20
IC20N
GDMW 2.4 2.40 0.18 0.04 0.030 2.00 18.00 • • • • • 0.25-1.50 0.07-0.12 0.05-0.08
• For cutting speed recommendations and user guide, see pages 419-428, 432-436
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: PADR/L (306) • PHGR/L (305) • PHSR/L (373)
306 ISCAR