Page 37 - HOLE_MAKING_CATALOG_INCH_2022_P187-P236

SCD-SXC30 OAL
Solid Carbide Drills with LCF LS DC h7
Internal Coolant Channels, LU
Drilling Depth 30xD 135
DCONMS h6
PL

M E T R I C
Dimensions
Designation DC DCONMS OAL LU LCF LS PL ULDR (2) IC908 SOLID CARBIDE DRILLS
SCD 030-097-060 SXC30 3.00 6.00 150.00 97.00 105.0 40.0 0.495 30.0 •
SCD 032-097-060 SXC30 3.20 6.00 150.00 97.00 105.0 40.0 0.528 30.0 •
SCD 033-127-060 SXC30 3.30 6.00 185.00 127.00 135.0 45.0 0.544 30.0 •
SCD 035-127-060 SXC30 3.50 6.00 185.00 127.00 135.0 45.0 0.578 30.0 •
SCD 038-127-060 SXC30 (1) 3.80 6.00 185.00 127.00 135.0 45.0 0.627 30.0 •
SCD 040-127-060 SXC30 4.00 6.00 185.00 127.00 135.0 45.0 0.660 30.0 •
SCD 042-127-060 SXC30 4.20 6.00 185.00 127.00 135.0 45.0 0.693 30.0 •
SCD 045-157-060 SXC30 4.50 6.00 215.00 157.00 165.0 45.0 0.743 30.0 •
SCD 047-157-060 SXC30 (1) 4.70 6.00 215.00 157.00 165.0 45.0 0.775 30.0 •
SCD 048-157-060 SXC30 4.80 6.00 215.00 157.00 165.0 45.0 0.792 30.0 •
SCD 050-157-060 SXC30 5.00 6.00 215.00 157.00 165.0 45.0 0.825 30.0 •
SCD 055-172-060 SXC30 5.50 6.00 230.00 172.00 180.0 45.0 0.907 30.0 •
SCD 058-172-060 SXC30 (1) 5.80 6.00 230.00 172.00 180.0 45.0 0.957 30.0 •
SCD 060-172-060 SXC30 6.00 6.00 230.00 172.00 180.0 45.0 0.990 30.0 •
SCD 065-207-080 SXC30 6.50 8.00 280.00 207.00 215.0 60.0 1.072 30.0 •
SCD 068-222-080 SXC30 6.80 8.00 280.00 222.00 230.0 45.0 1.122 30.0 •
SCD 070-222-080 SXC30 7.00 8.00 280.00 222.00 230.0 45.0 1.155 30.0 •
SCD 075-222-080 SXC30 (1) 7.50 8.00 280.00 222.00 230.0 45.0 1.238 30.0 •
SCD 078-257-080 SXC30 (1) 7.80 8.00 315.00 257.00 265.0 45.0 1.287 30.0 •
SCD 080-257-080 SXC30 8.00 8.00 315.00 257.00 265.0 45.0 1.320 30.0 •
SCD 085-287-100 SXC30 8.50 10.00 350.00 287.00 295.0 50.0 1.402 30.0 •
SCD 088-322-100 SXC30 (1) 8.80 10.00 380.00 322.00 330.0 45.0 1.452 30.0 •
SCD 090-322-100 SXC30 9.00 10.00 380.00 322.00 330.0 45.0 1.485 30.0 •
SCD 098-322-100 SXC30 9.80 10.00 380.00 322.00 330.0 45.0 1.617 30.0 •
SCD 100-322-100 SXC30 10.00 10.00 380.00 322.00 330.0 45.0 1.650 30.0 •
• For user guide and cutting conditions, see pages 225-235 (1) On request (2) Usable length diameter ratio
Recommended Machining Conditions for SCD-SXC30 Solid Carbide Drills
Cutting Diameter
Tensile Cutting
Strength Hardness Material Speed Feed (mm/rev)
ISO Material Condition [N/mm ] 2 HB No. Vc (m/min) 3.0-5.0 5.0-8.0 8.0-10.0
< 0.25 %C Annealed 420 125 1
>= 0.25 %C Annealed 650 190 2
Non-alloy steel and cast < 0.55 %C Quenched and 850 250 3
steel, free cutting steel tempered
>= 0.55 %C Annealed 750 220 4
>= 0.55 %C Quenched and 1000 300 5 65-75
tempered
Annealed 600 200 6 0.08-0.16 0.12-0.2 0.16-0.24
P Low alloy steel and cast steel 930 275 7
(less than 5% of alloying elements) Quenched and 1000 300 8
tempered
1200 350 9
High alloyed steel, cast Annealed 680 200 10 60-70
steel, and tool steel Quenched and 1100 325 11
tempered
Ferritic/ 680 200 12
Stainless steel and cast steel martensitic. 45-55 0.06-0.12 0.08-0.16 0.1-0.18
Martensitic 820 240 13
M Stainless steel and cast steel Austenitic 600 180 14 35-45 0.06-0.12 0.08-0.16 0.1-0.18
Ferritic/pearlitic 180 15
Grey cast iron (GG)
Pearlitic 260 16
Ferritic 160 17
K Cast iron nodular (GGG) 75-85 0.14-0.22 0.18-0.30 0.22-0.40
Pearlitic 250 18
Ferritic 130 19
Malleable cast iron
Pearlitic 230 20
Annealed 200 31
Fe based 35-50 0.06-0.12 0.08-0.16 0.1-0.18
Cured 280 32
High temp. alloys Annealed 250 33
S Ni or Co Cured 350 34 30-45 0.06-0.12 0.08-0.16 0.1-0.18
based
Cast 320 35
Pure RM 400 110 36
Titanium Ti alloys Alpha+beta 35-50 0.06-0.12 0.08-0.16 0.1-0.18
alloys cured RM 1050 310 37

221