Page 26 - HOLE_MAKING_CATALOG_INCH_2022_P237-P372

DEEP DRILLING - BTA SYSTEM
ISD-EC 1.496-4.212 4.213-6.653 6.654-9.173
Deep Single Tube Drills with
External 4-Start Thread DC DCONMS
Connection and Cartridges
(1.496-11.496 dia.)
LF
OAL
Designation DCN (1) DCX (2) OAL LF DCONMS Ts (3)
ISD-EC 1.496-1.559 1.496 1.559 3.543 3.346 1.181 TS-I11
ISD-EC 1.560-1.692 1.560 1.692 3.583 3.346 1.299 TS-I12
ISD-EC 1.693-1.850 1.693 1.850 3.976 3.740 1.417 TS-I13
ISD-EC 1.851-2.035 1.851 2.035 4.016 3.740 1.535 TS-I14
ISD-EC 2.036-2.212 2.036 2.212 4.213 3.937 1.693 TS-I15
ISD-EC 2.213-2.385 2.213 2.385 4.646 4.331 1.850 TS-I16
ISD-EC 2.386-2.558 2.386 2.558 4.685 4.331 2.008 TS-I17
ISD-EC 2.559-2.637 2.559 2.637 6.260 5.906 2.047 TS-I18
ISD-EC 2.638-2.873 2.638 2.873 6.260 5.906 2.283 TS-I19
ISD-EC 2.874-3.149 2.874 3.149 6.299 5.906 2.480 TS-I20
ISD-EC 3.150-3.424 3.150 3.424 7.520 7.087 2.756 TS-I21
ISD-EC 3.425-3.936 3.425 3.936 7.598 7.087 3.031 TS-I22
ISD-EC 3.937-4.212 3.937 4.212 7.598 7.087 3.504 TS-I23
ISD-EC 4.213-4.409 4.213 4.409 7.756 7.087 3.504 TS-I23
ISD-EC 4.410-4.881 4.410 4.881 8.701 8.071 3.976 TS-I24
ISD-EC 4.882-5.353 4.882 5.353 8.740 8.071 4.449 TS-I25
ISD-EC 5.354-5.826 5.354 5.826 8.780 8.071 4.921 TS-I26
ISD-EC 5.827-6.298 5.827 6.298 9.646 8.858 5.394 TS-I27
ISD-EC 6.299-6.653 6.299 6.653 9.685 8.858 5.866 TS-I28
ISD-EC 6.654-6.771 6.654 6.771 9.685 8.858 5.866 TS-I28
ISD-EC 6.772-7.243 6.772 7.243 9.724 8.858 6.339 TS-I29
ISD-EC 7.244-7.716 7.244 7.716 10.512 9.646 6.811 TS-I30
ISD-EC 7.717-8.188 7.717 8.188 10.630 9.646 7.283 TS-I31
ISD-EC 8.189-8.661 8.189 8.661 10.669 9.646 7.756 TS-I32
ISD-EC 8.662-9.133 8.662 9.133 11.535 10.433 8.189 TS-I33
ISD-EC 9.134-9.172 9.134 9.172 11.535 10.433 8.661 TS-I34
ISD-EC 9.173-9.606 9.173 9.606 11.575 10.433 8.661 TS-I34
ISD-EC 9.607-10.078 9.607 10.078 11.575 10.433 9.134 TS-I35
ISD-EC 10.079-10.551 10.079 10.551 12.677 11.417 9.606 TS-I36
ISD-EC 10.552-11.023 10.552 11.023 12.717 11.417 10.079 TS-I37
ISD-EC 11.024-11.496 11.024 11.496 12.795 11.417 10.551 TS-I38
• Important: The specified drilling range using the original outer cartridge and pad may be enlarged by using optional outer cartridges and pads as specified on page 274
• For quotation form and user guide see pages 269-271, 275-279, 337-338 • For spare parts, see pages 265-266 • Ordering example: ISD-EC 2.650
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Tube designation
For inserts, see pages: NPMX 0803 RB/RG (267) • TPMX (267)
For holders, see pages: TS-I** (322)

262 ISCAR