Page 27 - HOLE_MAKING_CATALOG_INCH_2022_P237-P372

ISD-IC 1.496-4.212 4.213-6.653 6.654-9.685
Deep Single Tube Drills with
Internal Single-Start Thread DC DCONMS
Connection and Cartridges
(1.496-11.574 dia.)
LF
OAL
Designation DCN (1) DCX (2) OAL LF DCONMS Ts (3)
ISD-IC 1.496-1.574 1.496 1.574 3.346 3.150 1.181 TS-O15
ISD-IC 1.575-1.731 1.575 1.731 3.386 3.150 1.299 TS-O16
ISD-IC 1.732-1.850 1.732 1.850 3.780 3.543 1.457 TS-O17
ISD-IC 1.851-2.046 1.851 2.046 3.819 3.543 1.614 TS-O18
ISD-IC 2.047-2.243 2.047 2.243 4.213 3.937 1.732 TS-O19 DEEP DRILLING - BTA SYSTEM
ISD-IC 2.244-2.401 2.244 2.401 4.646 4.331 1.929 TS-O20
ISD-IC 2.402-2.676 2.402 2.676 4.685 4.331 2.087 TS-O21
ISD-IC 2.677-2.952 2.677 2.952 5.079 4.724 2.323 TS-O22
ISD-IC 2.953-3.188 2.953 3.188 6.339 5.906 2.559 TS-O23
ISD-IC 3.189-3.582 3.189 3.582 6.378 5.906 2.795 TS-O24
ISD-IC 3.583-3.897 3.583 3.897 6.378 5.906 3.110 TS-O25
ISD-IC 3.898-4.212 3.898 4.212 6.417 5.906 3.543 TS-O26
ISD-IC 4.213-4.369 4.213 4.369 6.457 5.906 3.543 TS-O26
ISD-IC 4.370-4.842 4.370 4.842 6.496 5.906 4.016 TS-O27
ISD-IC 4.843-5.314 4.843 5.314 6.575 5.906 4.488 TS-O28
ISD-IC 5.315-5.865 5.315 5.865 6.614 5.906 4.961 TS-O29
ISD-IC 5.866-6.377 5.866 6.377 6.693 5.906 5.472 TS-O30
ISD-IC 6.378-6.653 6.378 6.653 8.307 7.480 5.945 TS-O31
ISD-IC 6.654-6.850 6.654 6.850 8.307 7.480 5.945 TS-O31
ISD-IC 6.851-7.322 6.851 7.322 8.386 7.480 6.417 TS-O32
ISD-IC 7.323-7.794 7.323 7.794 8.346 7.480 6.890 TS-O33
ISD-IC 7.795-8.267 7.795 8.267 8.465 7.480 7.362 TS-O34
ISD-IC 8.268-8.740 8.268 8.740 8.543 7.480 7.835 TS-O35
ISD-IC 8.741-9.172 8.741 9.172 8.583 7.480 8.307 TS-O36
ISD-IC 9.173-9.212 9.173 9.212 8.543 7.480 8.307 TS-O36
ISD-IC 9.213-9.685 9.213 9.685 8.622 7.480 8.780 TS-O37
ISD-IC 9.686-10.157 9.686 10.157 8.701 7.480 9.252 TS-O38
ISD-IC 10.158-10.629 10.158 10.629 9.528 8.268 9.646 TS-O39
ISD-IC 10.630-11.102 10.630 11.102 9.606 8.268 10.197 TS-O40
ISD-IC 11.103-11.574 11.103 11.574 9.646 8.268 10.669 TS-O41
• Important: The specified drilling range using the original outer cartridge and pad may be enlarged by using optional outer cartridges and pads as specified on page 274
• For spare parts and insert information, see pages 265-266 • For user guide and quotation form, see pages 269-271, 275-279, 337-338
• Ordering example: DSD-IC 2.650
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Tube designation
For inserts, see pages: NPMX 0803 RB/RG (267) • TPMX (267)
For holders, see pages: TS-O** (323)

Universal Marking for Deep Drilling Tools
D- Tool diameter
Metric- D197.00 D
Inch- D7.756
K
d- Pilot diameter
Metric- d175
Inch- d6.890
D197.00d175
Tool style D7.756d6.890
K- Solid drill cartridge style K1ST178
[Lot No.]
Thread type d
4ST- Four-start thread single tube
1ST- Single-start thread single tube
4DT- Four-start thread double tube
Thread type
178- Tube diameter

263