Page 89 - HOLE_MAKING_CATALOG_INCH_2022_P447-P626

90° 45 º
SCMT-14 45 º 75 º 45°
Square Inserts with a 7°
Positive Flank for Semi-Finishing IC=L D1
and Finish Turning on Soft ITS BORE
Materials and Exotic Alloys RE 7°
S

Dimensions Tough 1 Hard Recommended Machining Data

IC8250 IC807 IC907 ap f
Designation L S RE D1 (inch) (IPR)
SCMT 3-1-14 .375 .156 .0157 .173 • • .039-.138 .0047-.0118
SCMT 431-14 .500 .187 .0160 .217 • .039-.157 .0047-.0118
For tools, see pages: IHPR (479)

90°
SCMT-19 75 º
Square Inserts with a 7° Positive 45 º
Flank for Semi-Roughing at IC=L D1 45 º 45°
Medium to High Feeds 7°
RE
S

Dimensions Tough 1 Hard Recommended Machining Data

IC830 IC20 IC5005 IC807 IC907 ap fz
Designation L S RE D1 (inch) (IPR)
SCMT 432-19 .500 .187 .0315 .217 • • • • • .118-.315 .0031-.0059
SCMT 433-19 .500 .187 .0472 .217 • .118-.315 .0031-.0059
For tools, see pages: IHPR (479)

RE 45 º
SCGT-AS 7° 75 º 45 º 45°
Square Inserts with a 7° Positive
Flank, Very Positive Rake D1
Angle and Sharp Cutting Edge
for Machining Aluminum 90˚ IC=L S

Dimensions Recommended Machining Data

ap f
Designation IC S RE D1 IC20 (inch) (IPR)
SCGT 3-2-AS .375 .156 .0315 .173 • .020-.118 .0039-.0118
SCGT 431-AS .500 .187 .0157 .217 • .039-.157 .0039-.0118
SCGT 432-AS .500 .187 .0315 .217 • .039-.157 .0039-.0118
For tools, see pages: IHPR (479)

535