Page 40 - MILLING_CATALOG_INCH_2022_P1-P92

THSZMS
ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MM HCD DC
Interchangeable 2 Flute Solid DCX DCONMS
Carbide Heads for Chamfering, 140°
Countersinking and Spot Drilling
APMX KAPR
LU
LF Economical solution
Dimensions

IC908
Designation DCX (4) DCXTOL NOF (5) LU THSZMS DCONMS LF APMX DC KAPR (6)
MM HCD080-090-2T05 (1) .315 z9 2 .276 T05 .299 .384 .124 .039 45.0 •
MM HCD083-090-2T05 (1) .327 z9 2 .295 T05 .299 .394 .140 .039 45.0 •
MM HCD.375-080-2T06 .374 z9 2 .354 T06 .362 .465 .197 .079 50.0 •
MM HCD.375-100-2T06 (2) .374 z9 2 .382 T06 .374 .528 .142 .079 40.0 •
MM HCD100-060-2T06 .394 h10 2 .366 T06 .374 .463 .299 .059 60.0 •
MM HCD100-120-2T06 .394 h10 2 .374 T06 .374 .500 .106 .059 30.0 •
MM HCD100-090-2T06-N (1) .394 z9 2 .398 T06 .374 .551 .177 .059 45.0 •
MM HCD104-090-2T06 (1) .409 z9 2 .354 T06 .374 .463 .181 .059 45.0 •
MM HCD120-060-2T08 .472 h10 2 .433 T08 .453 .606 .364 .059 60.0 •
MM HCD120-120-2T08 .472 h10 2 .459 T08 .453 .598 .138 .059 30.0 •
MM HCD120-090-2T08 (1) .472 z9 2 .472 T08 .453 .610 .209 .059 45.0 •
MM HCD124-090-2T08 (1) .488 z9 2 .465 T08 .453 .610 .217 .059 45.0 •
MM HCD.500-080-2T08 (3) .500 z9 2 .437 T08 .480 .610 .268 .059 50.0 •
MM HCD.500-100-2T08 (2) .500 z9 2 .429 T08 .453 .579 .193 .059 40.0 •
MM HCD.625-080-2T10 .626 z9 2 .598 T10 .591 .740 .346 .079 50.0 •
MM HCD.625-100-2T10 (2) .626 z9 2 .587 T10 .594 .748 .244 .079 40.0 •
MM HCD160-060-2T10 .630 h10 2 .638 T10 .598 .795 .472 .098 60.0 •
MM HCD160-120-2T10 .630 h10 2 .610 T10 .598 .783 .173 .059 30.0 •
MM HCD160-090-2T10-N .630 z9 2 .618 T10 .598 .787 .291 .059 45.0 •
MM HCD165-090-2T10 (1) .650 z9 2 .587 T10 .598 .740 .280 .059 45.0 •
MM HCD.750-080-2T12 .750 z9 2 .772 T12 .726 .972 .433 .079 50.0 •
MM HCD.750-100-2T12 (2) .750 z9 2 .728 T12 .720 .929 .295 .059 40.0 •
MM HCD200-060-2T12 .787 h10 2 .717 T12 .726 .972 .610 .098 60.0 •
MM HCD200-120-2T12 .787 h10 2 .577 T12 .726 .833 .217 .059 30.0 •
MM HCD200-090-2T12 (1) .787 z9 2 .717 T12 .726 .972 .370 .059 45.0 •
• For shanks, see pages 83-90 • Clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) May be used for F-type (fine) countersink according to DIN 74.
(2) May be used for 100° countersink according to ISO 5856, DIN EN 4072, ANSI B18.6.3-1972
(3) Countersink according to American National and British standard flat screws.
(4) Cutting diameter maximum
(5) Number of flutes
(6) Tool cutting edge angle

38 ISCAR