Page 42 - MILLING_CATALOG_INCH_2022_P1-P92

ENDMILLS • SOLID CARBIDE • MULTI-MASTER
LF
MM HDF 90° THSZMS
Interchangeable 2 Flute Solid
Carbide Heads for Upper
and Bottom Chamfering DCX 90° DC DCONMS
L5 L6
FW Economical solution
Dimensions

IC908
Designation DCX (1) NOF (2) L5 L6 FW DC THSZMS DCONMS LF
MM HDF100-090-2T05 .386 2 .169 .035 .098 .047 T05 .299 .425 MM KEY 8X5* •
MM HDF120-090-2T06 .465 2 .209 .047 .079 .047 T06 .366 .441 MM KEY 10X7* •
MM HDF160-090-2T08 .618 2 .280 .087 .079 .059 T08 .453 .551 MM KEY 13X8* •
• For shanks, see pages 83-90 • Clamping keys to be ordered separately • For tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection • For user guide, see pages 37,219-228
(1) Cutting diameter maximum
(2) Number of flutes
* Optional, to be ordered separately

90°
MM EDF DRVS THSZMS
Interchangeable 3 Flute Solid
Carbide Heads for Upper DC 90° DCONMS
and Bottom Chamfering
L7
L6
LF
Dimensions

IC908
Designation DC DCONMS NOF (1) L6 L7 LF THSZMS
MM EDF074-090-58-3T04 .291 .228 3 .035 .039 .394 T04 •
MM EDF094-090-76-3T05 .370 .299 3 .035 .039 .492 T05 •
MM EDF116-090-95-3T06 .457 .378 3 .039 .039 .650 T06 •
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Number of flutes

l THSZMS
MM TS-45 RE
Interchangeable Solid KAPR
Carbide Small Diameter DC DCONMS
45° Chamfering Heads
CDX LF
LU

Dimensions

IC908
Designation DC KAPR (1) CDX (2) RE NOF (3) l THSZMS DCONMS LU LF
MM TS077-45-20A-4T05 .303 45.0 .047 .0079 4 .598 T05 .315 .406 .545 •
• For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92 • Do not apply lubricant to the threaded connection
(1) Tool cutting edge angle
(2) Cutting depth maximum
(3) Number of flutes

40 ISCAR