Page 44 - MILLING_CATALOG_INCH_2022_P1-P92
P. 44
ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MM GRIT Dovetail THSZMS
Interchangeable Solid DC
Carbide Heads
CDX KAPR
RE APMX
Dimensions Tough 1 Hard
IC528 IC908
Designation DC KAPR (1) CDX (2) APMX RE THSZMS NOF (3)
MM GRIT 28K-45D-6T10 1.091 135.0 .157 .197 .0079 T10 6 T-40/3 L* • •
MM GRIT 28K-60D-6T10 1.091 120.0 .157 .307 .0079 T10 6 T-40/3 L* • •
MM GRIT 28K-75D-6T10 1.091 105.0 .087 .398 .0079 T10 6 T-40/3 L* • •
• Use carbide shanks for groove milling heads • For user guide, see pages 37,219-228
(1) Tool cutting edge angle
(2) Cutting depth maximum
(3) Number of flutes
* Optional, to be ordered separately
MM GRIT 28K-45D-6T10 MM GRIT 28K-60D-6T10 MM GRIT 28K-75D-6T10
THSZMS
MM GRIT 28P-DR
Interchangeable 6 Flute Solid DCX DC DCONMS
Carbide Double-Sided Corner
Rounding Milling Heads
CF
PRFRAD
CW
LF
Dimensions Tough 1 Hard
Designation PRFRAD CF DCX (1) DC LF CW NOF (2) THSZMS DCONMS IC528 IC908
MM GRIT 28P-2.7-DR1.0 .039 .106 1.091 .976 .236 .220 6 T10 .602 T-40/3 L* • •
MM GRIT 28P-2.6-DR2.0 .079 .102 1.091 .902 .303 .287 6 T10 .602 T-40/3 L* • •
MM GRIT 28P-2.3-DR3.0 .118 .091 1.091 .831 .382 .350 6 T10 .602 T-40/3 L* • •
MM GRIT 28P-2.6-DR4.0 .157 .102 1.091 .776 .461 .429 6 T10 .602 T-40/3 L* • •
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Cutting diameter maximum
(2) Number of flutes
* Optional, to be ordered separately
42 ISCAR