Page 45 - MILLING_CATALOG_INCH_2022_P1-P92
P. 45
MM HR THSZMS
Interchangeable 2 Flute
Solid Carbide Corner DCXh10 DC DCONMS
Rounding Milling Heads
PRFRAD PATH APMX
LF
Economical solution
Dimensions
IC908
Designation DCX (1) PRFRAD Tm (2) NOF (3) DC APMX THSZMS DCONMS LF
MM HR1.0/047-5.8-2T05 .315 .0394 r0.5-3.0 2 .228 .295 T05 .299 .417 •
MM HR1.6/063-6.8-2T06 .394 .0630 r0.5-3.0 2 .268 .374 T06 .374 .492 •
MM HR2.0/078-6.0-2T06 .394 .0787 r0.5-3.0 2 .236 .374 T06 .374 .492 •
MM HR2.5/094-5.1-2T06 .394 .0984 r0.5-3.0 2 .201 .374 T06 .374 .492 •
MM HR3.0/125-6.5-2T08 .500 .1181 r0.5-4.0 2 .256 .472 T08 .453 .614 • ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MM HR4.0/156-4.7-2T08 .500 .1575 r0.5-4.0 2 .185 .472 T08 .453 .614 •
MM HR5.0/188-6.2-2T10 .630 .1969 r0.5-5.0 2 .244 .591 T10 .598 .752 •
MM HR6.0/236-8.0-2T12 .787 .2362 r0.5-6.0 2 .315 .276 T12 .726 .685 •
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Cutting diameter maximum
(2) Specially tailored radius range upon request.
(3) Number of flutes
MM ER THSZMS
Interchangeable 4 Flute
Solid Carbide Corner DCX DC DCONMS
Rounding Milling Heads
PRFRAD LF
Economical solution
Dimensions
Designation PRFRAD Tm (1) DC DCX (2) DCONMS NOF (3) LF THSZMS IC908
MM ER0.5/020-5.0-4T04 .0197 0.5-1.0 .197 .236 .236 4 .335 T04 •
MM ER1.0/040-5.8-4T05 .0394 0.5-1.4 .228 .315 .315 4 .394 T05 •
MM ER1.6/063-6.8-4T06 .0630 0.5-2.5 .268 .394 .394 4 .512 T06 •
MM ER2.0/078-6.0-4T06 .0787 0.5-2.5 .236 .394 .394 4 .512 T06 •
MM ER2.5/094-5.1-4T06 .0984 0.5-2.5 .201 .394 .394 4 .512 T06 •
MM ER3.0/125-6.5-4T08 .1181 0.5-3.1 .256 .500 .500 4 .650 T08 •
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Specially tailored radius range upon request.
(2) Cutting diameter maximum
(3) Number of flutes
43