Page 51 - MILLING_CATALOG_INCH_2022_P1-P92

MM TS-H THSZMS RE CW
Interchangeable Solid Carbide
T-Slot Milling Heads with DC CDX
Various Corner Radii
CW

Dimensions Tough 1 Hard

IC328 IC908
Designation DC DCTOLL CW CDX (1) NOF (2) RE THSZMS
MM TS.500-H125D-06T05 .500 -0.0020 .125 .088 6 .0150 T05 T-20/3* • •
MM TS.625-H056D-06T06 .625 -0.0020 .056 .125 6 .0160 T06 T-20/3* • •
MM TS.625-H063D-06T06 .625 -0.0020 .063 .125 6 .0160 T06 T-20/3* • •
MM TS.625-H068D-06T06 .625 -0.0020 .068 .125 6 .0160 T06 T-20/3* • •
MM TS.625-H078D-06T06 .625 -0.0020 .078 .125 6 .0160 T06 T-20/3* • • ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MM TS.625-H086D-06T06 .625 -0.0020 .086 .125 6 .0160 T06 T-20/3* • •
MM TS.625-H105D-06T06 .625 -0.0020 .105 .125 6 .0160 T06 T-25/3* • •
MM TS.625-H125D-06T06 .625 -0.0020 .125 .125 6 .0160 T06 T-25/3* • •
MM TS.625-H156D-06T06 .625 -0.0020 .156 .125 6 .0160 T06 T-25/3* • •
MM TS.750-H156D-06T08 .750 -0.0020 .156 .120 6 .0160 T08 T-30/3 L* • •
MM TS.750-H187D-06T08 .750 -0.0020 .187 .120 6 .0160 T08 T-30/3 L* • •
MM TS.750-H250D-06T08 .750 -0.0020 .250 .120 6 .0160 T08 T-30/3 L* • •
MM TS.875-H187D-06T08 .875 -0.0020 .187 .190 6 .0150 T08 T-40/3 L* • •
MM TS.875-H250D-06T08 .875 -0.0020 .250 .190 6 .0150 T08 T-40/3 L* • •
MM TS.875-H312D-06T08 .875 -0.0020 .312 .190 6 .0150 T08 T-40/3 L* • •
MM TS1.00-H187D-06T10 1.000 -0.0020 .187 .177 6 .0150 T10 T-50/3 L* • •
MM TS1.00-H250D-06T10 1.000 -0.0020 .250 .177 6 .0150 T10 T-50/3 L* • •
MM TS1.00-H375D-06T10 1.000 -0.0020 .375 .177 6 .0150 T10 T-50/3 L* • •
• Inserts in .197" and wider feature chip splitting edges • For tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection • For shanks, see pages 83-90 • For user guide, see pages 37,219-228
(1) Cutting depth maximum
(2) Number of flutes
* Optional, to be ordered separately

THUB OAL
MM TS-C LH THSZMS CW CDX
Interchangeable Solid Carbide
Circlip Groove Milling Heads DC DCONMS
According to DIN 471/472
45˚ t
CW±.0008 RE R.012
LF CDX
Dimensions

IC928
Designation DC CW CDX LF t RE THUB LH OAL DCONMS NOF (1) THSZMS
MM TS127C118T035-6T05 .500 .046 .014 .088 .011 .0020 .118 .106 .332 .303 6 T05 T-20/3* •
MM TS127C118T040-6T05 .500 .046 .016 .088 .013 .0020 .118 .106 .332 .303 6 T05 T-20/3* •
MM TS127C118T050-6T05 .500 .046 .020 .088 .017 .0020 .118 .106 .332 .303 6 T05 T-20/3* •
MM TS127C138T050-6T05 .500 .054 .020 .088 .017 .0020 .118 .106 .340 .303 6 T05 T-20/3* •
MM TS225C138T060-6T08 .886 .054 .024 .121 .020 .0020 .177 .165 .373 .461 6 T08 T-40/3 L* •
MM TS225C138T070-6T08 .886 .054 .028 .121 .024 .0020 .177 .165 .373 .461 6 T08 T-40/3 L* •
MM TS225C138T085-6T08 .886 .054 .033 .121 .029 .0020 .177 .165 .373 .461 6 T08 T-40/3 L* •
MM TS225C168T070-6T08 .886 .066 .028 .127 .024 .0039 .177 .165 .385 .461 6 T08 T-40/3 L* •
MM TS225C168T085-6T08 .886 .066 .033 .127 .029 .0039 .177 .165 .385 .461 6 T08 T-40/3 L* •
MM TS225C168T100-6T08 .886 .066 .039 .127 .035 .0039 .177 .165 .385 .461 6 T08 T-40/3 L* •
MM TS225C193T100-6T08 .886 .076 .039 .132 .035 .0039 .177 .165 .395 .461 6 T08 T-40/3 L* •
MM TS225C193T125-6T08 .886 .076 .049 .132 .044 .0039 .177 .165 .395 .461 6 T08 T-40/3 L* •
MM TS225C223T150-6T08 .886 .088 .059 .138 .054 .0039 .177 .165 .407 .461 6 T08 T-40/3 L* •
MM TS225C273T150-6T08 .886 .107 .059 .148 .055 .0079 .177 .161 .426 .461 6 T08 T-40/3 L* •
MM TS225C273T175-6T08 .886 .107 .069 .148 .065 .0079 .173 .154 .426 .461 6 T08 T-40/3 L* •
MM TS225C325T175-6T08 .886 .128 .069 .173 .065 .0079 .201 .181 .447 .461 6 T08 •
• For shanks, see pages 83-90 • For tightening torques and clamping instructions, see pages 91-92 • Do not apply lubricant to the threaded connection
• For user guide, see pages 37,219-228
(1) Number of flutes
* Optional, to be ordered separately
49