Page 54 - MILLING_CATALOG_INCH_2022_P1-P92

ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MM GRIT-16K/P,18K/P 3T6 DC THSZMS RE CW
Interchangeable Solid DMIN CDX
Carbide Small Diameter
Groove Milling Heads CDX
CW

Dimensions

IC908
Designation DC CW CDX (1) NOF (2) RE DMIN (3) THSZMS
MM GRIT16K150-010-3T6 .618 .059 .110 3 .0039 .630 T06 T-20/3* •
MM GRIT16P150-010-3T6 .618 .059 .110 3 .0039 .630 T06 T-20/3* •
MM GRIT16K157-020-3T6 .618 .062 .110 3 .0079 .630 T06 T-25/3* •
MM GRIT16K200-020-3T6 .618 .079 .110 3 .0079 .630 T06 T-20/3* •
MM GRIT16P220-110-3T6 .618 .087 .110 3 .0433 .630 T06 T-20/3* •
MM GRIT16K239-020-3T6 .618 .094 .110 3 .0079 .630 T06 T-25/3* •
MM GRIT16K250-020-3T6 .618 .098 .110 3 .0079 .630 T06 T-25/3* •
MM GRIT16K300-020-3T6 .618 .118 .110 3 .0079 .630 T06 T-25/3* •
MM GRIT16P300-020-3T6 .618 .118 .110 3 .0079 .630 T06 T-25/3* •
MM GRIT16K317-020-3T6 .618 .125 .110 3 .0079 .630 T06 T-25/3* •
MM GRIT18K120-005-3T6 .697 .047 .150 3 .0020 .709 T06 T-20/3* •
MM GRIT18P120-060-3T6 .697 .047 .150 3 .0236 .709 T06 T-20/3* •
MM GRIT18K140-005-3T6 .697 .055 .150 3 .0020 .709 T06 T-20/3* •
MM GRIT18K150-010-3T6 .697 .059 .150 3 .0039 .709 T06 T-20/3* •
MM GRIT18K157-020-3T6 .697 .062 .150 3 .0079 .709 T06 T-20/3* •
MM GRIT18K170-005-3T6 .697 .067 .150 3 .0020 .709 T06 T-20/3* •
MM GRIT18K200-020-3T6 .697 .079 .150 3 .0079 .709 T06 T-20/3* •
MM GRIT18P200-100-3T6 .697 .079 .150 3 .0394 .709 T06 T-20/3* •
MM GRIT18P220-110-3T6 .697 .087 .150 3 .0433 .709 T06 T-20/3* •
MM GRIT18K239-020-3T6 .697 .094 .150 3 .0079 .709 T06 T-20/3* •
MM GRIT18K250-020-3T6 .697 .098 .150 3 .0079 .709 T06 T-20/3* •
MM GRIT18K300-020-3T6 .697 .118 .150 3 .0079 .709 T06 T-25/3* •
MM GRIT18P300-150-3T6 .697 .118 .150 3 .0591 .709 T06 T-25/3* •
MM GRIT18K317-020-3T6 .697 .125 .150 3 .0079 .709 T06 T-25/3* •
• Recommended for O-rings and retaining rings • Modification options on request • Do not apply lubricant to the threaded connection
• For clamping instructions, see pages 91-92 • For user guide, see pages 37,219-228 • For shanks, see pages 83-90 • K-Type - For general steel machining
• P-Type - Positive geometry for soft and gummy materials
(1) Cutting depth maximum
(2) Number of flutes
(3) Minimum bore diameter
* Optional, to be ordered separately

52 ISCAR