Page 86 - MILLING_CATALOG_INCH_2022_P1-P92
P. 86
Continued
1 MM S-A-L...-H
ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MM S-A (stepped shanks) THSZWS C-Cylindrical
Stepped Cylindrical Shanks
Carrying Interchangeable BD DCONMS
Milling Heads 2 MM S-A-L...-CH SL-Safe-Lock®
LB
LBX
OAL
Designation THSZWS DCONMS BD LB LBX OAL Shank (1) Shank m. (2) CSP (3) Fig. RPMX (4) Lbs
MM S-A-L70/25-C100T15C-CH T15 1.000 .941 2.500 2.62 7.000 C C 1 2 19740 .00
MM S-A-L10.00-C1.00-T15-C T15 1.000 .940 5.900 6.00 10.000 C C 0 - 12690 3.32
MM S-A-L4/1.2-C1.25-T21 T21 1.250 1.181 1.200 1.32 4.000 C S 0 - 12690 1.23
MM S-A-L5/2.5-C1.25-T21-C T21 1.250 1.181 2.500 2.63 5.000 C C 0 - 12690 2.56
MM S-A-L5.3/25-C125T21-C T21 1.250 1.181 2.500 2.63 5.300 C C 0 - 999 2.76
MM S-A-L6.0/1.5-C1.25-T21 T21 1.250 1.181 1.500 1.63 6.000 C S 0 - 12690 .00
MM S-A-L7/4.0-C1.25-T21-C T21 1.250 1.181 4.000 4.13 7.000 C C 0 - 12690 3.75
MM S-A-L9/5.0-C1.25-T21-C T21 1.250 1.181 5.000 5.13 9.000 C C 0 - 16320 .00
MM S-A-L11/8-C1.25-T21-C T21 1.250 1.181 8.000 8.13 11.000 C C 0 - 12690 6.09
• Do not apply lubricant to the threaded connection • SL-Safe-Lock® by Haimer - helical grooves that prevent pull-out (available upon request for carbide shanks only)
(1) C-Cylindrical, SL-Safe-Lock® (by Haimer)
(2) S-steel, C-carbide, W-tungsten
(3) 0 - Without coolant supply, 1 - With coolant supply
(4) The maximum RPM must be calculated. Divide the listed max. RPM by the number of flutes (on the milling head) being used.
RE.197
MM S-A-C# DCONMS THSZWS BD
MULTI-MASTER Threaded
Connection Shanks with LU
a CAMFIX (ISO 26623-1) LPR LBX
Exchangeable Adaptation
Designation DCONMS THSZWS BD LPR LBX LU CDI (1) Lbs
MM S-A-H035-C3-T05 1.260 T05 .299 1.378 .79 .591 0 .26
MM S-A-H035-C3-T06 1.260 T06 .364 1.378 .79 .591 0 .27
MM S-A-H040-C3-T08 1.260 T08 .457 1.575 .98 .787 0 .28
MM S-A-H040-C3-T10 1.260 T10 .602 1.575 .98 .787 0 .33
MM S-A-H045-C3-T12 1.260 T12 .720 1.772 1.18 .984 0 .35
MM S-A-H045-C4-T06 1.575 T06 .364 1.772 .98 .787 0 .55
MM S-A-H045-C4-T08 1.575 T08 .457 1.772 .98 .787 0 .55
MM S-A-H050-C4-T10 1.575 T10 .602 1.968 1.18 .984 0 .62
MM S-A-H055-C4-T12 1.575 T12 .720 2.165 1.38 1.181 0 .66
MM S-A-H055-C4-T15 1.575 T15 .941 2.165 1.38 1.181 0 .77
MM S-A-H060-C5-T10 1.968 T10 .602 2.362 1.57 1.378 0 .00
MM S-A-H060-C5-T12 1.968 T12 .720 2.362 1.57 1.378 0 1.06
MM S-A-H060-C5-T15 1.968 T15 .941 2.362 1.57 1.378 0 1.28
MM S-A-H065-C6-T12 2.480 T12 .720 2.559 1.69 1.496 0 1.76
MM S-A-H065-C6-T15 2.480 T15 .941 2.559 1.69 1.496 0 1.85
MM S-A-H070-C8-T15 3.150 T15 .941 2.756 1.57 1.378 0 4.04
• Do not apply lubricant to the threaded connection • For adaptation options, see page 37
(1) 1 - Slot for data chip, 0 - Without slot for data chip
84 ISCAR
