Page 87 - MILLING_CATALOG_INCH_2022_P1-P92

MM TS-A Detail B THSZWS 1 MM TS-A-L...-H
Cylindrical Shanks Carrying
Interchangeable Milling Heads BD BD DCONMS
2 MM TS-A-L...-CH
30˚ B OAL

Designation THSZWS DCONMS BD OAL Shank m. (1) RPMX (2) CSP (3) Fig. Lbs
MM TS-A-L070-C08-T04 T04 .315 .228 2.756 S - 0 - .79
MM TS-A-L2.75-C.312-T05 T05 .312 .312 2.750 S 60000 0 - .06
MM TS-A-L4.00-C.312-T05-C T05 .312 .312 4.000 C - 0 - .15
MM TS-A-L6.50-C.312-T05-C T05 .312 .312 6.500 C - 0 - .25
MM TS-A-L3.25-C.375-T06 T06 .375 .375 3.250 S 47400 0 - .15
MM TS-A-L4.00-C.375-T06-C T06 .375 .375 4.000 C - 0 - .21
MM TS-A-L4.5-C375T06W-CH T06 .375 .364 4.500 W - 1 2 .25
MM TS-A-L7.00-C.375-T06-C T06 .375 .375 7.000 C - 0 - .38
MM TS-A-L080-C10-T06-H T06 .394 .378 3.150 S 46920 1 1 .08 ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MM TS-A-L090-C12-T08-H T08 .472 .457 3.543 S 42780 1 1 .17
MM TS-A-L3.75-C.500-T08 T08 .500 .500 3.750 S 43110 0 - .26
MM TS-A-L4.00-C.500-T08-C T08 .500 .500 4.000 C - 0 - .37
MM TS-A-L5.5-C500T08W-CH T08 .500 .480 5.500 W - 1 2 .65
MM TS-A-L7.50-C.500-T08-C T08 .500 .500 7.500 C - 0 - .73
MM TS-A-L4.00-C.625-T10 T10 .625 .625 4.000 S 39420 0 - .31
MM TS-A-L4.00-C.625-T10-C T10 .625 .625 4.000 C 39420 0 - .56
MM TS-A-L6.5-C625T10W-CH T10 .625 .602 6.500 W - 1 2 .98
MM TS-A-L8.00-C.625-T10-C T10 .625 .625 8.000 C - 0 - 1.20
MM TS-A-L100-C16-T10-H T10 .630 .602 3.937 S 39210 1 1 .31
MM TS-A-L4.00-C.750-T12-C T12 .750 .750 4.000 C - 0 - .78
MM TS-A-L7.5-C750T12W-CH T12 .750 .720 7.500 W - 1 2 1.97
MM TS-A-L8.00-C.750-T12-C T12 .750 .750 8.000 C - 0 - 1.70
• Do not apply lubricant to the threaded connection
(1) S-steel, C-carbide, W-tungsten
(2) The actual maximum RPM to be calculated by dividing the listed RPM max by the number of the head's flutes being used.
(3) 0 - Without coolant supply, 1 - With coolant supply

MM GRT (shanks) THSZWS MM GRT-...C-T08
Solid Carbide Cylindrical Shanks
Carrying Slitting and Grooving DCONMS
Interchangeable Milling Heads
OAL/LF

Designation THSZWS DCONMS OAL Shank m. (1) CSP (2) Lbs
MM GRT-095-T06 T06 .375 3.150 C 0 .16
MM GRT-100-T06 T06 .394 3.937 C 0 .23
MM GRT-120C-T08 T08 .472 3.937 C 1 .27
MM GRT-127C-T08 T08 .500 4.724 C 1 .37
• MM GRT... shanks serve mainly for MM GRIT... slitting heads. When mounting other types of milling heads, do not exceed maximum specified depth of cut for the particular
milling head. Since the shank diameter is not relieved, it may touch a wall on the workpiece being machined.
• Use carbide shanks for groove milling heads and for applications requiring high rigidity and precision.
(1) C - Solid carbide
(2) 0 - Without coolant supply, 1 - With coolant supply

85