Page 104 - MILLING_CATALOG_INCH_2022_P229-P360
P. 104
FAST FEED MILLING TOOLS
FFT3 EFM-02 LH OAL
Small Diameter Endmills LU
Carrying Single-Sided Triangular DC DCONMS Rd°
Inserts for Fast Feed Milling DCX
APMX
14˚
Designation DCX (1) DC APMX AE (2) CICT (3) LU LH OAL DCONMS Shank (4) RMPX° (5) MDN (6) MDX (7) MIID (8) TQ (9) Lbs
FFT3 EFM D08-2-060-C10-02 .315 .087 .0236 .114 2 .6693 .787 2.362 .394 C 10.8 .402 .591 FFT3 TXMT 0201205T 4.50 .07
FFT3 EFM D08-2-080-C12-02 .315 .087 .0236 .114 2 1.0236 1.181 3.150 .472 C 10.8 .402 .591 FFT3 TXMT 0201205T 4.50 .11
FFT3 EFM D10-3-070-C10-02 .394 .165 .0236 .114 3 .7677 .787 2.756 .394 C 4.7 .559 .748 FFT3 TXMT 0201205T 4.50 .09
FFT3 EFM D10-3-090-C12-02 .394 .165 .0236 .114 3 1.1811 1.299 3.543 .472 C 4.7 .559 .748 FFT3 TXMT 0201205T 4.50 .13
• Radius for programming .043 inch • To generate a straight surface without cusps, the width of cut must not exceed DC
(1) Cutting diameter maximum
(2) Maximum plunging width
(3) Number of inserts
(4) C-Cylindrical
(5) Maximum ramping angle
(6) Machinable diameter minimum for interpolation
(7) Machinable diameter maximum for interpolation
(8) Master insert identification
(9) Recommended tightening torque (lbf*in) for insert screw
For inserts, see pages: FFT3 TXMT 02 (486)
Spare Parts
Designation
FFT3 EFM-02 SR M2X0.4-2.9 T6-HG (a) T-6/5 MAGNET 3X3
(a) Recommended tightening torque:4.42 lbf*in
LF OAL
DC
FFT3 EFM-MM 02 DCX THSZMS DCONMS Rd°
Small Diameter Endmills with
a MULTI-MASTER Threaded
Adaptation Carrying Triangular APMX 14˚
Inserts for Fast Feed Milling
Designation DCX (1) DC APMX AE (2) CICT (3) LF DCONMS THSZMS OAL DRVS (4) RMPX° (5) MDN (6) MDX (7) MIID (8) TQ (9) Lbs
FFT3 EFMD08/.31-2MMT05-02 .315 .087 .0236 .114 2 .394 .299 T05 .659 .217 10.8 .402 .591 FFT3 TXMT 0201205T 4.50 .02
FFT3 EFMD10/.39-3MMT06-02 .394 .165 .0236 .114 3 .394 .382 T06 .642 .315 4.7 .559 .748 FFT3 TXMT 0201205T 4.50 .02
• For adaptation, see page 303 • For user guide, see pages 586-591 • Radius for programing .043" • To generate a straight surface without cusps, the width of cut must
not exceed DC
(1) Cutting diameter maximum
(2) Maximum plunging width
(3) Number of inserts
(4) Torque key size
(5) Maximum ramping angle
(6) Machinable diameter minimum for interpolation
(7) Machinable diameter maximum for interpolation
(8) Master insert identification
(9) Recommended tightening torque (lbf*in) for insert screw
For inserts, see pages: FFT3 TXMT 02 (486)
For holders, see pages: MM CAB (733) • MM CAB-T-T (90) • MM GRT (shanks) (85) • MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86)
• MM S-A-C# (84) • MM S-A-HSK (672) • MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER (88)
• MM S-ER-H (89) • MM TS-A (85)
Spare Parts
Designation
FFT3 EFM-MM 02 SR M2X0.4-2.9 T6-HG T-6/5 MAGNET 3X3
332 ISCAR
