Page 108 - MILLING_CATALOG_INCH_2022_P229-P360

FAST FEED MILLING TOOLS
DCX DC THSZMS DCONMS
FFX4 ED-MM Rd°
Endmills with MULTI-MASTER
Adaptation Carrying Small "Bone APMX 17˚ DRVS
Shaped" Inserts with 4 Cutting LF
Edges for Fast Feed Milling OAL

(6)
(4)
(3)
Designation DCX (1) DC CICT (2) APMX AE THSZMS LF OAL DCONMS RMPX° MDN (5) MDX DRVS (7) MIID (8) TQ (9) Rg (10) Lbs
FFX4 ED16/.63-2-MMT10-04 .630 .339 2 .0315 .146 T10 .787 1.250 .598 4.3 .969 1.220 .512 FFX4 XNMU 040310T .04 .071 .05
FFX4 ED20/.78-3-MMT12-04 .787 .496 3 .0315 .146 T12 .984 1.508 .740 2.7 1.283 1.535 .591 FFX4 XNMU 040310T .04 .071 .10
FFX4 ED25/.98-4-MMT15-04 .984 .693 4 .0315 .146 T15 1.181 1.850 .945 1.8 1.677 1.929 .748 FFX4 XNMU 040310T .04 .071 .32
• To generate a straight surface without cusps, the width of cut must not exceed DC
(1) Cutting diameter maximum
(2) Number of inserts
(3) Maximum plunging width
(4) Maximum ramping angle
(5) Machinable diameter minimum for interpolation
(6) Machinable diameter maximum for interpolation
(7) Torque key size
(8) Master insert identification
(9) Recommended tightening torque (lbf*in) for insert screw
(10) Radius for programming
For inserts, see pages: FFX4 XNMU-04 (565)
For holders, see pages: MM CAB-T-T (90) • MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86) • MM S-A-C# (84) • MM S-A-HSK (672)
• MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER (88) • MM S-ER-H (89) • MM TS-A (85)

Spare Parts

Designation
FFX4 ED-MM SR M2.5X6-T7-60 T-7/51

DCONMS
DHUB
FFX4 FD-04
Face Mills Carrying
"Bone Shaped" Inserts OAL Rd°
with 4 Cutting Edges for
Fast Feed Milling 17˚
DC APMX
DCX

Designation DCX (1) DC CICT (2) APMX AE (3) OAL DHUB DCONMS Arbor RMPX° (4) MDN (5) MDX (6) Rg (7) MIID (8) Lbs
FFX4 FD1.50-6-.50-04 1.500 1.209 6 .0310 .145 1.500 1.417 .500 A 1.0 2.709 2.961 .071 FFX4 XNMU 040310T .51
FFX4 FD2.00-7-.75-04 2.000 1.709 7 .0310 .145 1.500 1.850 .750 A .6 3.709 3.961 .071 FFX4 XNMU 040310T .86
• To generate a straight surface without cusps, the width of cut must not exceed DC
(1) Cutting diameter maximum
(2) Number of inserts
(3) Maximum plunging width
(4) Ramping angle maximum
(5) Machinable diameter minimum for interpolation
(6) Machinable diameter maximum for interpolation
(7) Radius for programming
(8) Master insert identification
For inserts, see pages: FFX4 XNMU-04 (565)

Spare Parts

Designation
FFX4 FD1.50-6-.50-04 SR M2.5X6-T7-60 SR UNF 1/4X1 B18.3 T-7/51
FFX4 FD2.00-7-.75-04 SR M2.5X6-T7-60 SR UNF 3/8X1 B18.3 T-7/51

336 ISCAR