Page 117 - MILLING_CATALOG_INCH_2022_P229-P360
P. 117
DCONMS
DHUB
FFQ4 D-17
Fast Feed Face Mills
Carrying Single-Sided Inserts OAL Rd°
with 4 Cutting Edges
14°
DC APMX
DCX
Designation DCX (2) DC APMX AE (3) CICT (4) OAL DCONMS DHUB RMPX° (5) MDN (6) MDX (7) CSP (8) Arbor MIID (9) TQ (10) Lbs
FFQ4 D3.00-06-1.25-17 3.000 1.850 .1180 .574 6 2.000 1.250 2.874 1.2 4.850 5.961 1 A FFQ4 SOMT 170625T 80.00 1.79
FFQ4 D4.00-07-1.50-17 4.000 2.850 .1180 .574 7 2.000 1.500 3.228 .8 6.850 7.961 1 A FFQ4 SOMT 170625T 80.00 2.91
FFQ4 D5.00-08-1.50-17 5.000 3.850 .1180 .574 8 2.250 1.500 3.228 .6 8.850 9.961 1 B FFQ4 SOMT 170625T 80.00 4.44 FAST FEED MILLING TOOLS
FFQ4 D6.00-10-2.00-17 (1) 6.000 4.850 .1180 .574 10 2.500 2.000 5.000 .4 10.850 11.961 0 B FFQ4 SOMT 170625T 80.00 9.81
• To generate a straight surface without cusps, the width of cut must not exceed DC • Radius for programming: for insert SOMT .217" for insert SOMW .252"
• When mounting insert SOMW, APMX=.098" • For slot milling or machining with high tool overhang, the maximum depth of cut should be reduced by 50%
• For user guide, see pages 586-591
(1) For internal coolant, use a matching coolant set (to be ordered separately)
(2) Cutting diameter maximum
(3) Maximum plunging width
(4) Number of inserts
(5) Maximum ramping angle
(6) Machinable diameter minimum for interpolation
(7) Machinable diameter maximum for interpolation
(8) 0 - Without coolant supply, 1 - With coolant supply
(9) Master insert identification
(10) Recommended tightening torque (lbf*in) for insert screw
For inserts, see pages: FFQ4 SOMT/W 1706 (561)
Spare Parts
Designation
FFQ4 D3.00-06-1.25-17 SR M5-14 IP20 BLD IP20/S7 SW6-T
FFQ4 D4.00-07-1.50-17 SR M5-14 IP20 BLD IP20/S7 SW6-T-SH
FFQ4 D5.00-08-1.50-17 SR M5-14 IP20 BLD IP20/S7 SW6-T
FFQ4 D6.00-10-2.00-17 SR M5-14 IP20 BLD IP20/S7 SW6-T
DHUB
FFQ8-12 DCONMS
Fast Feed Face Mills Carrying
Double-Sided Inserts OAL APMX Rd°
with 8 Cutting Edges
12˚
DC
DCX
Designation DC DCX (1) APMX CICT (2) OAL DHUB DCONMS Arbor RMPX° (3) MDN (4) MDX (5) MIID (6) Lbs
FFQ8 D2.00-05-0.75-12 1.236 2.000 .0600 5 1.625 1.850 .750 A .3 3.236 3.960 FFQ8 SZMU 120520 1.61
FFQ8 D2.50-06-1.00-12 1.736 2.500 .0600 6 1.750 2.250 1.000 A .2 4.236 4.960 FFQ8 SZMU 120520 1.94
FFQ8 D3.00-07-1.00-12 2.236 3.000 .0600 7 1.750 2.250 1.000 A .2 5.236 5.960 FFQ8 SZMU 120520 3.64
FFQ8 D4.00-08-1.50-12 3.236 4.000 .0600 8 2.000 3.230 1.500 B .1 7.236 7.960 FFQ8 SZMU 120520 6.17
• Radius for programming .142" • To generate a straight surface without cusps, the width of cut most not exceed DC • For slot milling or machining with high tool
overhang, the maximum depth of cut should be reduced by 30%
(1) Cutting diameter maximum
(2) Number of inserts
(3) Maximum ramping angle
(4) Machinable diameter minimum for interpolation
(5) Machinable diameter maximum for interpolation
(6) Recommended tightening torque (lbfxin) for insert screw
For inserts, see pages: FFQ8 SZMU (562)
Spare Parts
Designation
FFQ8 D2.00-05-0.75-12 SR M4X0.7-L11.5 IP15 BLD IP15/S7 SW6-T-SH SR UNF 3/8X1 B18.3
FFQ8 D2.50-06-1.00-12 SR M4X0.7-L11.5 IP15 BLD IP15/S7 SW6-T-SH SR UNF 1/2X20X1 B18.3
FFQ8 D3.00-07-1.00-12 SR M4X0.7-L11.5 IP15 BLD IP15/S7 SW6-T-SH SR UNF 1/2X20X1 B18.3
FFQ8 D4.00-08-1.50-12 SR M4X0.7-L11.5 IP15 BLD IP15/M7 SW6-T-SH
345