Page 79 - MILLING_CATALOG_INCH_2022_P229-P360

DRVS

HCM-MM DCX THSZMS DCONMS
Ball Nose Multifunction
Endmills with MULTI-MASTER LF
Threaded Adaptation OAL

Designation DCX (1) OAL (2) LF (3) DCONMS THSZMS DRVS (4) TQ TQ_3 (5) Lbs PROFILING TOOLS
HCM D12/.50-MMT08 .472 1.102 .787 .453 T08 .394 132.76 180 .03 SR 34-540 BLD T15/S7 SW6-T
HCM D16/.62-MMT10 .630 1.447 .984 .598 T10 .512 247.82 295 .06 SR 10503579 BLD T20/S7 SW6-T
HCM D20/.75-MMT12 .787 1.921 1.378 .728 T12 .591 247.82 180 .12 SR 1052964 BLD T25/S7 SW6-T
HCM D25/1.0-MMT15 .984 2.480 1.811 .945 T15 .787 354.03 355 .29 SR 1051666 BLD T25/S7 SW6-T
• The dimensions are for HBR inserts. • Do not apply lubricant to the MULTI-MASTER threaded connection • For adaptation options, see page 303
• For user guide, see pages 586-591
(1) Cutting diameter maximum
(2) Refers to HBR inserts
(3) Refers to HBR inserts
(4) Width across flats (wrench should be ordered separately)
(5) Tool tightening torque Nxm (lbfxin)
For inserts, see pages: HBF-QF (576) • HBR-QF (576) • HCD-QF (577) • HCR (577)
For holders, see pages: MM CAB (733) • MM GRT (shanks) (85) • MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86)
• MM S-A-C# (84) • MM S-A-HSK (672) • MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER (88)
• MM S-ER-H (89) • MM TS-A (85)

OAL

BLP Endmills APMX LH
Three Flute 240° Ball
Nose Endmills Carrying Rd°
Double-Sided Inserts DCX 240° DCONMS

RE

Designation DCX (1) RE APMX NOF (2) OAL LH DCONMS Shank MIID (3) Lbs
BLP D0.62-1.5-4.0-C.62 .625 .3120 .468 3 4.000 1.500 .625 C BLR D0.62-QT .00
BLP D0.75-2.5-5.0-C.75 .750 .3750 .562 3 5.000 2.500 .750 C BLR D0.75-QT .51
BLP D1.0-3.5-6.0-W1.0 1.000 .5000 .750 3 6.000 3.500 1.000 W BLR D1.0-QT .00
BLP D1.25-3.0-6.0-W1.25 1.250 .6250 .937 3 6.000 3.000 1.250 W BLR D1.25-QT .00
BLP D1.5-4.0-7.0-W1.50 1.500 .7500 1.125 3 7.000 4.000 1.500 W BLR D1.50-QT .00
BLP D2.00-4.7-8.0-W2.0 2.000 1.0000 1.500 3 8.000 4.700 2.000 W BLR D2.00-QT .00
• For user guide, see pages 586-591
(1) Cutting diameter maximum
(2) Number of flutes
(3) Master insert identification
For inserts, see pages: BLR (578)

Spare Parts
Designation
BLP D0.62-1.5-4.0-C.62 SR M2.5X0.45-L6 IP7 IP-7/51
BLP D0.75-2.5-5.0-C.75 SR M3X0.5-L7.4 IP9 IP-9/151
BLP D1.0-3.5-6.0-W1.0 SR M3.5X0.6-L8.5 IP10 BLD IP10/S7 SW6-SD
BLP D1.25-3.0-6.0-W1.25 SR M4X0.7-L9.6 IP15 BLD IP15/S7 SW6-SD
BLP D1.5-4.0-7.0-W1.50 SR M5-14 IP20 BLD IP20/S7 SW6-T
BLP D2.00-4.7-8.0-W2.0 SR M6X1-L18 IP25 BLD IP25/S7 SW6-T

307