Page 83 - MILLING_CATALOG_INCH_2022_P229-P360

E93CN-07
Toroidal Bull Nose Endmills with DC DCONMS
CNHT...and ENHT... Inserts Rd°
3°
APMX
LH
OAL

Designation DC (1) APMX CICT (2) LH OAL RMPX° (3) DCONMS Shank (4) MIID (5) Lbs PROFILING TOOLS
E93CN D.750-3L60C.750-07 .750 .200 3 3.000 6.000 3.0 .750 C CNHT 070315 .63
E93CN D1.00-4L70C1.00-07 1.000 .200 4 4.000 7.000 2.0 1.000 C CNHT 070315 1.36
(1) The specified diameter is for inserts with a .039" radius. For other radii options, see diameter change in the table below
(2) Number of inserts
(3) Maximum ramping angle
(4) C-Cylindrical
(5) Master insert identification
For inserts, see pages: CNHT/MT 07 (581)

Spare Parts

Designation
E93CN-07 SR 34-505/LHG T-8/53

E93CN-M-07
Bull Nose Endmills with DC THSZMS DCONMS
FLEXFIT Threaded Adaptation Rd°
Carrying Toroidal Inserts APMX 3°
LF
OAL

Designation DC (1) APMX CICT (2) LF OAL THSZMS RMPX° (3) DCONMS MIID (4) TQ_3 (5) Lbs
E93CN D1.00-4-M12-07 1.000 .200 4 1.380 2.240 M12 2.0 .830 CNHT 070315 295 .21 SR 34-505/LHG T-8/53
• When mounting items with FLEXFIT threaded adaptation, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to
eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter
(1) The specified diameter is for inserts with a .039" radius. For other radii options, see diameter change in the table below
(2) Number of inserts
(3) Maximum ramping angle
(4) Master insert identification
(5) Tool tightening torque Nxm (lbfxin)
For inserts, see pages: CNHT/MT 07 (581)
For holders, see pages: BT-ODP (FLEXFIT) (356) • C#-ODP (FLEXFIT) (356) • CAB M-M (FLEXFIT) (354) • CAT-ODP (FLEXFIT) (360)
• ER-ODP (358) • HSK A-ODP (FLEXFIT) (359) • S M (354) • S M-CF (355)

311