Page 80 - MILLING_CATALOG_INCH_2022_P229-P360

PROFILING TOOLS BLP-M DCX (1) .3120 NOF (2) APMX 1.141 DCX RE APMX LF THSZMS DCONMS DRVS (3) BLR D0.62-QT TQ_3 (5) Rd° Lbs
OAL
Three Flute Fully Effective
240° Ball Nose Endmills with
THSZMS
DCONMS
FLEXFIT Threaded Adaptation
DRVS

(4)
OAL
Designation
LF
RE
MIID
BLP D16/.62-M08
.942
.625
M12
.468
1.631
3
9.600
355
.00
.512
BLP D0.75-M08
9.600
BLR D0.75-QT
3
M12
.562
1.830
.750
.512
.00
355
.3750
BLP D25/1.0-M12
.07
355
.5000
2.252
17.000
M08
.826
.750
3
BLR D1.0-QT
1.385
1.000
M16
.905
3
2.436
BLP D32/1.25-M12
.6250
1.570
.937
1.250
17.100
1.577
BLP D32/1.25-M16
.937
25.100
BLR D1.25-QT
355
2.554
M16
1.141
.6250
.00
3
1.250
M08
.7500
355
3.031
25.100
1.500
.00
1.141
BLR D1.50-QT
BLP D1.5-M16
3
2.047
1.125
• For user guide, see pages 586-591• When mounting items with FLEXFIT threaded adaptation, the mating surfaces and threaded areas must be thoroughly cleaned. Apply
appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter BLR D1.25-QT 355 .00
(1) Cutting diameter maximum
(2) Number of flutes
(3) Torque key size
(4) Master insert identification
(5) Tool tightening torque Nxm (lbfxin)
For inserts, see pages: BLR (578)
For holders, see pages: BT-ODP (FLEXFIT) (356) • C#-ODP (FLEXFIT) (356) • CAB M-M (FLEXFIT) (354) • CAT-ODP (FLEXFIT) (360)
• ER-ODP (358) • HSK A-ODP (FLEXFIT) (359) • S M (354) • S M-CF (355)

Spare Parts
Designation
BLP D16/.62-M08 SR M2.5X0.45-L6 IP7 IP-7/51
BLP D0.75-M08 SR M3X0.5-L7.4 IP9 IP-9/151
BLP D25/1.0-M12 SR M3.5X0.6-L8.5 IP10 BLD IP10/S7 SW6-SD
BLP D32/1.25-M12 SR M4X0.7-L9.6 IP15 BLD IP15/S7 SW6-T
BLP D32/1.25-M16 SR M4X0.7-L9.6 IP15 BLD IP15/S7 SW6-T
BLP D1.5-M16 SR M5-14 IP20 BLD IP20/S7 SW6-T
OAL
LH
BLP Shell Mill APMX
Three Flute Fully Effective
240° Ball Nose Cutters with Rd°
Shell Hole Adaptation DCX DCONMS DHUB
RE
Designation DCX (1) RE NOF (2) APMX LH OAL DHUB DCONMS MIID (3) Lbs
BLP D2.00-1.0 2.000 1.0000 3 1.500 1.984 3.200 1.909 1.000 BLR D2.00-QT .00
• Use on face mill adapters with the supplied retention screw • For user guide, see pages 586-591
(1) Cutting diameter maximum
(2) Number of flutes
(3) Master insert identification
For inserts, see pages: BLR (578)

Spare Parts
Designation
BLP Shell Mill SR M6X1-L18 IP25 BLD IP25/S7 SW6-T SR M10X1X14-10700 SR 1/2-20 UNF-17230 HW 5.0
308 ISCAR