Page 112 - Turning_catalog_INCH_2022_45_P261-508
P. 112
GROOVE-TURN AVC-GAIC (1) DCONMS 1.161 OAH H A LF 1.024 DCONMS View A OAW OAW
Adapters for Internal Grooving
Turning and Threading Blades
OAH
Designation
H
LF
1.260
1.417
1.642
AVC-D32-GAIC-50
AVC-D40-GAIC-50
1.024
1.161
1.575
1.642
1.417
(1) When using 1968" shank, DMIN=DMIN of CGIN blade + 394" • When using 2362" shank, DMIN=DMIN of CGIN blade + 787"
For tools, see pages: CGIN 26 (372)
• For CGIN 26 blades
Spare Parts
Designation
AVC-GAIC SR M3X8 DIN913 SR M5X20DIN912 HW 2.0 SR M4X8 DIN913 HW 4.0 HW 1.5
CGIN 26 CWN-CWX CDX
Internal Grooving and Turning
Blades for GHIC...-50 Bars H DMIN
HF WFN-WFX
OHN-OHX
OAL WB
150°
Designation CWN (1) CWX (2) WB WFN (3) WFX (4) OHN (5) OHX (6) HF OAL H DMIN
CGIN 26K-3 .110 .157 .094 1.10 1.30 .39 .59 .622 1.772 1.024 1.968
CGIN 26K-4 .142 .177 .126 1.10 1.30 .39 .59 .622 1.772 1.024 1.968
CGIN 26K-5 .173 .252 .157 1.10 1.30 .39 .59 .622 1.772 1.024 2.126
CGIN 26A-3 .110 .157 .094 1.28 1.48 .57 .77 .622 1.949 1.024 2.126
CGIN 26A-4 .142 .177 .126 1.28 1.48 .57 .77 .622 1.949 1.024 2.126
CGIN 26A-5 .173 .252 .157 1.28 1.48 .57 .77 .622 1.949 1.024 2.126
• WFN-WFX and OHN-OHX are the blade's extension range
• Grooving depth (CDX) varies in conformance with blade's overhang (OHN-OHX) and depends on the bore diameter(D)For grooving capacity, see chart below
• When using TIPI inserts toolholder seat needs to be modified according to insert profile to ensure clearance • For user guide, see pages 471-488
(1) Minimum cutting width
(2) Maximum cutting width
(3) Adjustable extension
(4) Adjustable extension
(5) Minimum overhang for adjustable extension
(6) Maximum overhang for adjustable extension
For inserts, see pages: GIFI (376) • GIFI-E (373) • GIFI-E (full radius) (374) • GIMIY (373) • GINI-E (374) • GIPI (375) • GIPI (full radius) (376) • GIPI-E (373) • TIPI-MT (707)
For holders, see pages: AVC-GAIC (372) • GHIC-50 (370)
Internal Grooving Capacity for CGIN Blades
.708 OH=.768 Example:
OH=.748
.670 For grooving depth CDX=.50”,
OH=.709 and grooving width=.157”, in bore
Grooving Depth CDX (inch) .512 OH=.591 and adjust overhang to OH=.63”.
.630
OH=.670
.590
D=2.40”, use blade CGIN 26A-4
OH=.630
.551
OH=.551
.472
OH=.512
.433
OH=.472
.394
OH=.433
.354
.315
.275
.236 OH=.393
1.97 3.94 5.90 Bore Diameter D (inch)
372 ISCAR