Page 78 - Turning_catalog_INCH_2022_45_P261-508
P. 78
GROOVE-TURN PENTAS 27 blanks CDX Dimensions BW
ø1.062
Blank Inserts with 5 Wide Cutting
Edges for the Production of
Special Profile Contours
CW
Designation
BW
CW
PENTAS 27-10FT .394 CDX .465 • IC08
.157
PENTAS 27-15FT .591 .157 .661 •
PENTAS 27-20FT .787 .157 .858 •
For tools, see pages: PCHR/L-27-JHP-MC (327)
CW
PENTA 34N-PB RE ±.0016 1.34
Parting and Grooving Pentagonal
Inserts for Parting Bearing Steel
and Other Ductile Materials
.169
Recommended
Dimensions
Machining Data
IC908 f groove
Designation CW RE CWTOL (1) RETOL (2) CDX (3) (IPR)
PENTA 34N150PB015 .059 .0059 .0008 .0012 .335 • .0012-.0024
PENTA 34N200PB020 .079 .0079 .0008 .0012 .335 • .0012-.0031
PENTA 34N300PB020 .118 .0079 .0008 .0012 .374 • .0012-.0039
• For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) For grooving and parting depths relative to part diameter, see page 339
For tools, see pages: PCADR/L (330) • PCADR/L 34N-RE (331) • PCADR/L-JHP (330) • PCHBR/L (332) • PCHPR/L (329) • PCHR/L-34 (328)
• PCHR/L-34-JHP (328)
338 ISCAR