Page 57 - Turning_catalog_INCH_2022_45_P509-690

TAG N-UT RE CW
Single-Sided Inserts for Parting, 7°
Grooving & Slitting at Low PARTING
Feeds on Cr-Ni Alloys, Ductile
Materials & Low Carbon Steel

Dimensions Tough 1 Hard Recommended
Machining Data

IC830 IC808 IC908 f groove
Designation CW RE CWTOL (1) RETOL (2) (IPR)
TAG N2UT .079 .0079 .0016 .0016 • • • .0012-.0039
TAG N3UT .118 .0118 .0016 .0016 • • .0016-.0047
TAG N4UT .157 .0118 .0016 .0016 • .0020-.0059
TAG N5UT .197 .0118 .0016 .0016 • .0020-.0071
TAG N6UT .236 .0335 .0016 .0016 • .0024-.0087
• For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: ADMP D45 (576) • TAGPAD-JHP (554) • TAGPAD-XL-JHP (555) • TANMM (556) • TGAD (552) • TGAD RE/LE-JHP (552)
• TGAQ (570) • TGAQ-ECD (JET-CROWN) (573) • TGAQ-JHP (569) • TGBHR/L (354) • TGFH-JHP (547) • TGFH-MB (551) • TGFH-S (548)
• TGFH/R/L (356) • TGFHL-TR (560) • TGFHR/L (549) • TGFHR/L-JHP (549) • TGFS (556) • TGSU (550) • TGTR/L-2T..SH-L120 (558)
• TGTR/L-D (559) • TGTR/L-IQ (557) • TGTR/L-IQ-2Z (557) • TGTR/L-JHP (558)

565