Page 55 - Turning_catalog_INCH_2022_45_P509-690

JT J
TAG N-J/JS/JT CW RE
Single-Ended Inserts for 7º
Parting, Grooving and PARTING
Slitting Soft Materials

Dimensions Tough 1 Hard Recommended
Machining Data

IC830 IC928 IC1030 IC5400 IC1010 IC808 IC908 IC807 f groove
Designation CW RE CWTOL (2) RETOL (3) IC20 (IPR)
TAG N1.4J .055 .0063 .0016 .0012 • • • .0012-.0039
TAG N1.6J .063 .0063 .0016 .0012 • • .0012-.0047
TAG N2JS (1) .079 .0008 .0016 .0008 • • .0012-.0031
TAG N2J .079 .0079 .0016 .0016 • • • • • • .0016-.0047
TAG N2JT .079 .0079 .0016 .0016 • • • • • .0016-.0055
TAG N3JS (1) .120 .0008 .0016 .0008 • • .0016-.0039
TAG N3J .120 .0079 .0016 .0012 • • • • • • • • • .0016-.0063
TAG N3JT .120 .0079 .0016 .0012 • • • • .0020-.0071
TAG N3.2JT .128 .0079 .0016 .0012 • • .0020-.0071
TAG N4J .157 .0094 .0016 .0012 • • • • • • • • .0016-.0071
TAG N4JT .159 .0094 .0016 .0012 • • • • .0024-.0079
TAG N5J .199 .0098 .0016 .0016 • • • .0020-.0079
TAG N5JT .199 .0098 .0016 .0016 • • • .0024-.0087
TAG N6.3J .250 .0134 .0016 .0016 • • .0024-.0087
TAG N6.3JT .250 .0134 .0016 .0016 • • .0031-.0098
TAG N7JT .278 .0197 .0016 .0016 • • .0039-.0110
• JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds.
• For cutting speed recommendations, see pages 600-601
(1) Sharp corners cannot be used on TGSF slitting cutters
(2) Cutting width tolerance (+/-)
(3) Corner radius tolerance (+/-)
For tools, see pages: ADMP D45 (576) • TAGPAD-JHP (554) • TAGPAD-XL-JHP (555) • TANMM (556) • TGAD (552) • TGAD RE/LE-JHP (552)
• TGAQ (570) • TGAQ-ECD (JET-CROWN) (573) • TGAQ-JHP (569) • TGBHR/L (354) • TGFH-JHP (547) • TGFH-MB (551) • TGFH-S (548)
• TGFH/R/L (356) • TGFHL-TR (560) • TGFHR/L (549) • TGFHR/L-JHP (549) • TGFS (556) • TGSU (550) • TGTR/L-2T..SH-L120 (558)
• TGTR/L-D (559) • TGTR/L-IQ (557) • TGTR/L-IQ-2Z (557) • TGTR/L-JHP (558)

563