Page 54 - Turning_catalog_INCH_2022_45_P509-690

PARTING TAG R/L-C RE CW PSIRL PSIRR CW RE 7º

Single-Ended Inserts for Parting
Bars, Hard Materials and
Tough Parting Applications

R
L
Dimensions Tough 1 Hard Recommended
Machining Data

IC830 IC928 IC808 IC908 IC30N f groove
Designation CW CWTOL (1) RE PSIRR PSIRL (IPR)
TAG L2C-6D .081 .0039 .008 - 6.0 • • .0016-.0047
TAG R2C-6D .081 .0039 .008 6.0 - • • .0016-.0047
TAG R2.4C-8D .094 .0039 .006 8.0 - • .0020-.0051
TAG L3C-6D .118 .0039 .008 - 6.0 • • • • .0031-.0071
TAG R3C-6D .118 .0039 .008 6.0 - • • • • .0031-.0071
TAG R3C-8D .118 .0039 .008 8.0 - • .0024-.0063
TAG L3C-15D .118 .0039 .008 - 15.0 • • • • .0031-.0063
TAG R3C-15D .118 .0039 .008 15.0 - • • • • .0031-.0063
TAG L4C-4D .159 .0039 .009 - 4.0 • • .0031-.0079
TAG R4C-4D .159 .0039 .009 4.0 - • • • • .0031-.0079
TAG L5C-4D .199 .0039 .010 - 4.0 • • .0039-.0098
TAG R5C-4D .199 .0039 .010 4.0 - • • .0039-.0098
TAG L6.3C-4D .250 .0039 .014 - 4.0 • • .0047-.0118
TAG R6.3C-4D .250 .0039 .014 4.0 - • • .0047-.0118
• For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
For tools, see pages: ADMP D45 (576) • TAGPAD-JHP (554) • TAGPAD-XL-JHP (555) • TANMM (556) • TGAD (552) • TGAD RE/LE-JHP (552)
• TGAQ (570) • TGAQ-ECD (JET-CROWN) (573) • TGAQ-JHP (569) • TGBHR/L (354) • TGFH-JHP (547) • TGFH-MB (551) • TGFH-S (548)
• TGFH/R/L (356) • TGFHL-TR (560) • TGFHR/L (549) • TGFHR/L-JHP (549) • TGFS (556) • TGSU (550) • TGTR/L-2T..SH-L120 (558)
• TGTR/L-D (559) • TGTR/L-IQ (557) • TGTR/L-IQ-2Z (557) • TGTR/L-JHP (558)

TAG N-MF CW RE 7°
Single-Ended Inserts for Parting
Grooving and Slitting Stainless
and Alloy Steel at Medium Feed

Recommended
Dimensions Tough 1 Hard
Machining Data

IC830 IC1030 IC5400 IC1010 IC808 IC807 f groove
Designation CW CWTOL (1) RE (IPR)
TAG N2MF .079 .0020 .008 • • • • • .0016-.0059
TAG N3MF .120 .0020 .008 • • • • • • .0024-.0071
TAG N4MF .157 .0020 .010 • • • • • .0027-.0087
TAG N5MF .197 .0020 .010 • • .0031-.0098
• For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
For tools, see pages: ADMP D45 (576) • TAGPAD-JHP (554) • TAGPAD-XL-JHP (555) • TANMM (556) • TGAD (552) • TGAD RE/LE-JHP (552)
• TGAQ (570) • TGAQ-ECD (JET-CROWN) (573) • TGAQ-JHP (569) • TGFH-JHP (547) • TGFH-MB (551) • TGFH-S (548) • TGFH/R/L (356)
• TGFHL-TR (560) • TGFHR/L (549) • TGFHR/L-JHP (549) • TGFS (556) • TGSU (550) • TGTR/L-2T..SH-L120 (558) • TGTR/L-D (559) • TGTR/L-IQ (557)
• TGTR/L-IQ-2Z (557) • TGTR/L-JHP (558)

562 ISCAR